vcds

  1. R

    A3 Cabriolet 2016 - No display on reverse parking sensors. VCDS

    Hi All, I noticed there are other threads about this and people saying this is a super simple trick to do using the VCDS system. Can I check is there anyone around the Wirral, Wrexham, Merseyside area willing to help me out and get my display up please? I pick up the car today. Not having the...
  2. itchyhippo

    Hill Hold Assist

    So I'm under the consensual opinion that Hill Hold cannot be activated on facelift A1's/S1's - however, i've just treated myself to ODBEleven for Christmas. Their app/forum seems to suggest Hill Hold is possible using the following coding; Hill Hold Assist Activation Select Control unit 03...
  3. V6_Man

    Fault codes after battery replacement

    Hi Folks, I finally picked up an Audi A4 B8 (1.8tfsi) and the seller replaced the battery for me and replaced it with He bought a new Yuasa HSB110 Silver (800amps and 85aH). I must admit the seller has been very very helpful and has assured me that he will fix any issues with the car. This has...
  4. S

    Throttle delay, 3 error codes

    Hi all. I have a A4 TDI QUATTRO 170 56 plate. Recently the car was juddering under increased throttle, then the coil/glow plug warning would flash under increased throttle. Now it's a glorified ornament sitting in my driveway as it starts and idles. But if I apply any throttle it only...
  5. chris.vincent3

    Audi Q7 back-up cam cannot be reached?

    Hi, my dads friend that owns a Q7 that I've been resetting his service light for sometime now as he does his own service and gets me to turn it off with VCDS. Reset the service last year and his back-up cam has stopped working since. Since then he's checked the camera and all connections...
  6. Z

    Audi S3 reduce maximum speed limit via VCDS

    Hi, Is it possible to reduce the maximum speed limit to 100 MPH via VCDS on a 2015 Audi S3 Sportback (Auto)? I have hooked the car to VCDS software, went to controller 17 and adaption but there is no channel for maximum speed. Any help would be much appreciated. Thanks
  7. D

    Cruise control retrofit help needed

    Hi all, Can anyone help me with the correct stalks and lower cowling to fit a 2004 3 door 3.2 a3, 8p0 054 690 and 8p0 953 512a? I read that I'll need the extra cable from ecu to blue thing but will I also need a new steering module for cruise control to work perfectly? If so which module and...
  8. Dylan Johnson

    Steering Angle Sensor fault, but VCDS can't tell me what it is?

    I had an ABS sensor die on me which I assumed triggered the steering and ESP light, I replaced the ABS wheel speed sensor which fixed the ABS light but the steering wheel and ESP light is still on. VCDS says this: 1 Fault Found: 00778 - Steering Angle Sensor (G85) 000 - - Also...
  9. A

    VCDS in Epsom or surrounding? Surrey/Hampshire

    Hi all, New member, hoping to get some help with clearing an airbag error light on a 2012 Audi A1. Made the mistake of running it with glovebox/airbag unplugged and having re-fitted glovebox realised the error isn't self cancelling :blink:. Trading the car in in 2 days and hoping someone...
  10. S

    Help wanted with VAGCOM fault codes

    Hi All, I've run a scan on my "new" Audi A3 and have recovered the following fault codes. I have the Engine Management light on on the dash so I know there is an issue with the engine faults, however I dont want to change evergything! Does anyone have any suggestions as to: 1 - how to work out...
  11. malaz44

    Ross tech HEX-CAN cable

    Hey guys, I want to buy a Genuine Ross Tech HEX-CAN Cable to suit all VAG vehicles, Whos got one for sale!! Post To Melbourne Thanks Matt
  12. AudiTurbo8

    1.8TFSI Misfire Problems

    Hi guys, I've posted about this before but had a few updates since posting. sorry for the duplicate post! I've got a 1.8tfsi A3 with 60k miles on the clock. it's was remapped by Revo around 18 months ago and ever since had an issue where it would hesitate at 160orpm when cold. it's since...
  13. Callum Jarvis

    New Headunit & Bose VCDS/VAG Com Coding

    Hi guys I'm new to posting on the forum although have been reading for ages now. I have a little problem and was wondering if anyone out there can help me. I have a Bose sound system fitted from factory but decided I wanted to upgrade my head-unit (Original RMC Connect plus) due to not having...
  14. A

    VCDS / Vag-com help in Bolton/Chorley/Wigan area

    Hi all, It's been a while since I last owned an Audi and I'm just about to return to the marque and buy what will be my fourth Audi. My last Audi was an A5 3.0tdi and a very helpful forum member near Leeds helped me access the hidden MMI menu and change a couple of settings. I would like...
  15. itchyhippo

    Hill Hold Assist - VCDS?

    Chaps, Is Hill Hold Assist programmable with VCDS? I've heard conflicting info about it on the S1. Cheers! Alex
  16. T

    My faults questions

    Hi, My parking sensors haven't worked for awhile now. Is it a simple job that I could replace the parking control module? My passenger door locks and unlocks when it feels like it. Do I need a new motor according to the log? How do I address the other issues? I think the radio issue is...
  17. DarGri

    OBD11

    Hi all, Is there anyone in the Scotland/Central Belt area with OBD11 ? Cheers,
  18. Dylan Johnson

    Odd problem, car thinks it has Xenon lights... but doesn't. How to disable in VCDS?

    So my car has headlight leveling sensors on the wheel (for xenon lights i assume?) however it has just the normal headlamps so its making the dash beep with a fault about headlight leveling... Was told by local garage the leveling sensors are for Xenon lights only which makes me think someone...
  19. Dylan Johnson

    Just bought VCDS, how do I clear ABS, ESP and Power Steering faults?

    So, decided to take the plunge and bought a cable which should be arriving soon. The reason I bought it is because I have ABS, Traction Control and Power Steering lights on. I would like to check for faults, fix them and then clear them, from what I've seen the interface looks pretty self...
  20. Gwsinc

    VCDS in Portsmouth

    Since updating MMI my splash screen is wrong and B&O bass gone! Found some fixes online, is there anyone in Portsmouth with VCDS who can help activate 'secret' menu? Thanks in advance!
Top