vacuum

  1. Marius Gone

    FAULT: 000665 - Boost Pressure Regulation

    Hello everyone! I'm fighting with this fault code for a couple of weeks. Maybe is someone here who can help me. First of all, you have to know that I'll give you all the documentation needed, I'm sure it is nothing hard, it is just something I don't know how to figure out and all that I need is...
  2. L

    Bkd vacuum line simplification?

    What can be removed on the vacuum um line? Similar to the pd130 can the vac ball be removed? Can an n75 valve be fitted?
  3. L

    2.0tdi bkd vac reservoir delete?

    Can the vac reservoir be deleted similar to the pd130 setup with an n75 valve? I have no egr, egr cooler and looking to clean the bay up abit more
  4. L

    Mods and deletes

    Any more mods i can to my bkd, so far the egr and egr cooler has gone, can i delete the vac reservoir ball like the pd130. Thanks
  5. L

    A3 8p bkd vacuum solenoid mod?

    Ive been wondering if these bkd engines can have a similar n75 vaccum mod like my previous pd130 golf. Tia
  6. pilla

    Camchain/Vacuum pump issue (pics)

    Afternoon, just whipped the neccesary off to have a look at the camchain, Im getting a lot of rattle at low revs, especially when the engine is cold, sounds horrible, sounds a bit like a bearing grating/rasping noise to be honest. Im not sure how to test the camchain or the tensioners condition...
  7. D

    Diesel issue driving me nuts

    Diesel issue with a 02 a4. Any help would be appreciated. Have vacume pump changed filter changed non return valve fitted and still it seems to be starving itself of diesel won't jump start only pull start and now if you pull it and it starts it's cutting out after a few seconds or if you take...
  8. Nagasaki

    Vacuum PCV delete - non return valve for brake booster

    Hi. Have recently completed a full SAI and PCV delete and as per various instructions, connected a line straight from the rear of the rocker cover to the brake servo. Brakes are working okay but am wondering whether I should be putting a non return valve in the line to stop boost from entering...