misfire

  1. Snacker

    1.4TFSI Cylinder 2 Misfire

    Hi all, again! Patient is: 1.4TFSI CAXC - Liqui Moly TopTec 4200 5W30 - ~206.000KM on the clock - Timing replaced at ~178.000KM Will most likely take it to a proper garage at the end of the day, but i wanted to check if anyone has different opinion / had similar case. Cylinder 2 has started...
  2. H

    Audi S1 2014 8X - Cylinder 3 Misfire Under High Load

    Hello, I recently bought an Audi S1 2.0 2014 8X, however I'm getting cylinder 3 misfire when the accelerator is pushed right down. I've replaced the spark plugs but the issue continues. Misfire Repo Steps - Around ~4000 RPM, the car begins to judder - If I continue to press the accelerator...
    • Hazukiy
    • Thread
    • 2.0 litre 2014 audi s1 misfire
    • Replies: 2
    • Forum: S1 forum
  3. S

    2l TFSI running issues

    Hi everyone, I’ve got an Audi 2l tfsi EA888 gen 1 engine and the notorious timing chain tensioner went and it skipped timing and bent all the intake valves. I’ve now replaced all the valves, timing chain and tensioner and iall the things that go along with that and t’s back together. When I...
  4. A

    Misfire on restart

    Hi folks, I've got a 2014 S3 and it's recently started to misfire after a restart. No issues on a cold start, only when I've driven it, turned it off and turned it back on again. It can happen whether I drive it 2 miles or 40 miles, same thing happens. I've tried a round of injector cleaner...
  5. A

    Audi s3 66 plate P0011 code

    I have an Audi s3 66 plate with over 120k mileage and recently whilst idling the car seems to be misfiring and shows a P0011 code when OBD is plugged in but also when harsh accelerating or when launching the car it throws up a "drive system fault" message and then seemingly loses power with a...
    • audi.s3
    • Thread
    • audi s3 camshaft sensor engine misfire p0011 power delivery issues
    • Replies: 2
    • Forum: A3/S3 (8V Chassis)
Top
Back