crank

Hi all I’ve been having some issues with my 2015 A7 3.0tb I start up. I can start the car first time with no issues. If I switch the engine off and try to restart the engine, it will crank but not start the engine? If I leave the engine off for around 2/3 minutes it will start up with no...

Evening all having a bit of a problem with my A4 B7 avant 2.0tdi, went out to the car the other night after not using it for a week and a half about 2 degrees outside tried to start it and was a very slow turn over followed by the click of the starter so battery off and on charge, fully charged...

Hi, Can anybody provide me with a Bosch or Audi part number for the crank position sensor. My engine is APY. Have tried looking online and I have checked the Bosch automotive catalogue but getting several different options. Thanks in advance Kris

I’m looking for some information on which 2.0T FSI crankshaft to buy for my build. I’m a little bit confused and keep getting conflicting information on which part number or engine code to go for. I want to get a forged 92.8mm stroke crank and I have always been under the impression that any...

Swapping 1.8t engine out of a CVT B7 into a B6 Quattro and have read that there can be differences in the cranks between Automatic and Manual cars. Both engines codes are BFB so was hoping that they would be easily interchangeable. Uprated ECS clutch (below) going in so flywheel will be changed...

Hi folks, I have a B7 Sline, 140 Tdi multitronic, 68k miles on the clock and with a BRE engine (not sure whether to smile or cry). I started getting this strange sound back in August and ran a scan twice. Both times no faults found with the most recent scan being yesterday. I am not sure...

Hi guys need some expert advice been struggling with this for weeks and dont know where to go next. Story starts that a bought a 2005 a5 2.0 tdo blb (140) with what I was told needed a turbo. Got it home to find that she needed more than a turbo, the head was away and she was pressuring the...

Hi I've got a bam engine and no3 spark plug exploded took the piston out and marked the bore so my plan is to bore the cylinders to 83mm as this is what information I've found suggests. Now I want to stroke it from research ive got 2 options 1.9d or 2.0tfsi What's your opinion? It's not for...