conversion

  1. D

    FWD to AWD VW

    Hi everyone, I hope you're all doing well. Just wanted to check does anyone has experience with AWD conversion for the new beetle which is almost the same platform as golf IV if I'm right...I found one video with conversion from vw t5 to golf III,but nothing about mark iv and new beetle...
  2. Jason-888

    What are the power gains (if any) of an AGU head on bam block?

    Hi guys, this is my first post. Iv recently purchased an S3 8l, i made sure it was a BAM engine code as i believe these are the more desirable engine. Was looking in the engine bay at the weekend and discovered an 'AGU' stamp on the head. I was at first dissapointed thinking id bought a car...
  3. Seksodia

    Audi a6 3.0 tfsi apr stage 1 lpg conversion

    I have a 2012 audi a6 3.0 tfsi apr stage 1 and i was wondering if anyone has done a lpg conversion and if it has any problems. Thank you.
  4. A

    2006 b7 1.9tdi to 2.0tdi conversion

    Hi everyone, i have plans to do an engine conversion on my 06 b7 a4. Has anyone on done this as i would like some advice. I know that i need the engine, the gearbox, the ECU, the wiring harness. Is there anything else that i need. Thanks in advance guys
  5. Harry P

    A3 sline rear bumper conversion

    hello, I’m after any information as I recently got a 66 plate Audi A3 s like 1.6 tdi sport back 5 door, facelift. I really want to convert the exhaust to a s3 and also the rear bumper is this possible, or is it a lot of work. Any one have any input on this. Thanks. Harry
  6. M

    Help needed: 1985 Audi 100 Avant converting from petrol to diesel

    Hello all, I am converting an Audi 100 Avant (1985) from petrol to diesel. I would like to use a 2.5 turbo diesel engine. I have access to a 2.5 turbo diesel from a Audi A6 (2002). I was wondering if I can remove throttle box and immobiliser unit from injection pump and use the old system of...
  7. E

    Bi xenon conversion?

    Hi all, I have a 2006 8p 3 door and I'm wanting to do the xenon conversion from standard halogen. I've learnt that it's a different type of connector with one extra pin required? Are there any adapters that can be used to make this happen? Thanks
  8. P

    Brake Conversion?

    Hi all, I hope this is in the right place! I'm looking to put bigger brakes on my b5 TQS, I have got a set of callipers and hangers from the mk1 TT, which are 312mm. If anyone has any experience with this, how straight forward of a job is this? Also does anyone have recommendations for disks...
  9. A

    UK to NZ Maps

    Hi Aui-Sport forum members, Apologies as I'm new here but looking for some advice on navigation software - and specifically updating maps to a different region. We have just ordered a new A6 (with MMI touch navigation) for delivery early in 2019 (latest software/firmware) it will be a UK...
  10. L

    Audi A3 s line bumper problems

    i recently purchased and Audi A3 06 sline which needed a bit of front end work doing, have sorted out the internal work but coming to the bumper I purchased a rs3 03 on had it sprayed and got it fitted with the slam panel that came with it but the lights I currently had didn’t fit that slam...
  11. WezS3

    Apx to BAM conversion

    Hi everyone Has anybody got experience with this conversion. I've just finished building my s3 swapped blown APX engine out to a BAM replaced loom and ecu with the engine. I try starting the car, it turns over, fires and then stops I've double checked the wires and vacuum pipes and all...
  12. Micael

    Will a 2008 facelift bumper fit in a 2006 A3 sportback?

    Hello everyone, The title of this thread pretty much says it all, I have a 2006 Audi A3 and I'm looking to give it a new look with a 2008 facelift bumper. Will it fit without any problems? My current bumper: Bumper I want to purchase: Thank you
  13. M

    Audi A3 K04 conversions/install help??

    Hello everyone, New to this so please bare with me, as mentioned in the title I'm looking to do a k04 conversion on my 2003 Audi a3 on a AUM Engine code, I have purchased the kit itself consisting of cupra r MAF, injectors with rail, throttle body/rail k04 turbo with all water and oil lines in...
  14. M

    AUDI A3 K04 CONVERSION/INSTALL HELP??

    Hello everyone, New to this so please bare with me, as mentioned in the title I'm looking to do a k04 conversion on my 2003 Audi a3 on a AUM Engine code, I have purchased the kit itself consisting of cupra r MAF, injectors with rail, throttle body/rail k04 turbo with all water and oil lines in...
  15. AudiTom

    A5 2008 to FaceLift rs look?

    Hey, Members of the alpha race. I just got my A5 3.0TDI before I bought this car I intended to do a facelift conversion I have scoward the internet for information on how to go about FL rs looking it I mean im doing the backend after, this seems easier than the front so I was looking at using...
  16. A

    RS5 half conversion

    I brought a 2011 A5 cabriolet to convert to an RS5. Only problem is I can't find a diffuser that will fit. I've checked everywere. I can't even find videos of a cabriolet rs5 conversion. Can someone help me find parts please! I want to change the front bumper and grille. Not facelifting the...
  17. C

    CODING ISSUE WITH XENON HEADLIGHT CONVERSION *RETRO FIT* HELP!!

    ill explain a little , ive had these lights put in some of you might have seen my earlier posts but i got them in and the lights coded to work on low beams and the led strip to work as parking lights the man who coded it completely removed the option for DRLs on the infotainment system , its a...
  18. AudiTom

    A5 - RS5 Face?

    Hello fellow Audi users, I have just purchased an A5 2009, She has a 3.0 tdi and i have already mapped it. I was just thinking how good the rs5 face looks lights grill etc. How would i go about putting a rs5 face on my A5, .Will it just fit ? also do i need to buy the side panels and bonnet as...
  19. C

    A4 XENON CONVERSION ADAPTER ISSUES *NEED IMMEDIATE HELP*

    folks i got the xenon headlights put into my 2011se a4, i have it all connected and programmed but the problem is , i have two yellow wires one hanging from each converter "the connector between car and headlight" and they need plugged into the light module , i have a man to do it i contacted...
  20. Nathan Bailey

    Crankshaft Sensor Conversion?

    I have recently fitted a pd130 ASZ engine into my Audi A3 replacing the pd105 BXE engine as this had spun a shell and seized the engine. The only problem now is it will not start as the crankshaft sensor if different, I can get the engine started by spraying a fuel substitute into the inlet...
Top