canbus

  1. L

    HELP!HELP! AUDI CONCERT!!!!!

    I’ve got a 2010 a3 with Audi concert. I bought a Bluetooth module to fit the back of the head unit to act as a CD changer, but works via bluetooth. I had to remove the 12 pin blue adapter which was located where the white adapter is now (as pictured), next to the green adapter to fit the...
  2. Z

    massage / memory seat wiring and coding

    Hi guys in need of some assistance here, recently acquired some S4 electric super sport bucket seats with massage and memory module already under the seats and swapped them over from my manual heated seats with lumbar. Straight swap worked for the electric movement and heated function however...
  3. Y

    CAN-BUS ABS wheel speeds A3 8L

    Hi guys, my name is Ygor and I'm developing some systems to get information from the CAN-BUS of the Audi A3 8L 1998-2006, I did some tests but I was not successful, I would like to know if anyone would have this information to help me. What I need is the Protocol (code) sent by Can for ABS...
  4. Widg

    A solution for replacing foot well and boot bulbs with LED - CANbus error

    Faffing today to repair some of the previous owners' attempts at chaving up my car. Problem - The foot well lights and boot light not working. No power to either circuits, fuses OK, needed to reset error codes to get power back to circuits. Now got power for about 2 seconds. After repairing...
  5. DylanJ

    Weird radio problems (Audi Concert)

    When I bought my car someone had installed a rubbish aftermarket radio and the rear speakers didnt work and it was poorly installed so I just bought the original Audi Concert to replace it. It works great and all however it doesn't turn on or off with the key I have to press the volume button...
  6. milkyjoe01

    No. Plate CANBUS error but LED works fine??

    Hey guys. Strange issue i'm having! Just bought a 2012 A3 S-Line Black Edition S.B., used to have a 2004 A3 3 dr. with aftermarket, eBay no. plate LED's installed that worked perfect for over a year with no errors, so i took the CANBUS error free LED no. plate lights out & installed them in the...
  7. Joakimeg

    CAN-bus problem

    Hello, I wanted to code in AUX in my Audi A3 tfsi 8P 2005. When I connect the VCDS I can not connect to the specific modules. For some reason the auto-trans works...? The error message is: ""No response from controller" I managed to connect to the navi (37) for some seconds, but now I am...
  8. Crossmax

    Has anyone here installed error free canbus H11 LED bulbs that haven't given an error!

    Hello everyone. Am interested in changing my fog light bulbs to LED but don't want the whole error situation cropping up, I have tried other so-called error free bulbs in my car but they never seem to work. Has anyone out there ever installed H11 bulbs that have not...
  9. rcnacura

    JB4 used as a USB OBD device?

    Hello All! I've been trying to figure out a way to get two devices to talk to the OBD port, which is technically impossible the way it works. JB4 is currently hooked up permanently to the car so I've been trying to figure if there is a way to use a spare OBD device to get data directly from the...
  10. T

    No communication with CAN Gateway after RNS-E Coding Attempt

    Hey guys/girls, A friend has a 2010 A3 2.0 TDI Quattro and asked for my help coding in his recently fitted RNS-E. Unfortunately I've ticked a box or changed a number that has stopped the CAN Gateway working. Auto Scan no longer works, it just scans the CAN Gateway and tells me that there's no...
  11. Vampy11

    Which stereo?

    Hi, Can anyone recommend a good aftermarket stereo to replace the original double-din chorus stereo in a 2010 A3 please? Preferably one which looks as close to the Audi Sat-nav version as possible/not looking too out of place, and with Bluetooth, Sat-nav, and Aux-in? We'd previously bought a...