1. R

    For Sale Lots of V6 biturbo parts

    I used to be obsessed with these 10-15 years ago, which is about as long as most of these parts have been lying around. I used to collect unusual parts to customise how the car would run Let me know if you have a project v6 turbo land yacht S4, RS4, A6 or Passat and I will have something that...
  2. L

    Help needed, befuddled me!

    Just coming to the end of rebuilding an A6 C5 Avant 2.7t AJK with Tip FAW(5A). Started up fine after priming system, and didn't even have a MIL light!! Only the Airbag light which was a known issue. Heat cycled it, a few times, and emptied the flushing oil and water out, for the good stuff. All...
  3. pilla

    S4 aircon delete question

    Hello. My serpentine belt is in need of replacement and i fancy doing away with the air-con while im in there. Can anyone advise me on correct belt/part size, and any info about the procedure i could benefit from? All ive found is audizine nonsence that i cant understand. Thanks.
  4. L

    Torque converter left on flex plate?

    Following VAG manual to pull engine from A6 (2.7t AJK), but won't be able to rotate crank to undo bolts as has cam belt failure. Is there any advice from people who have done this before? Can i just pull engine without undoing bolts, and leave TC on engine? Don't want to cause myself more...
  5. pilla

    Piggies - Loud or not?

    Evening all. Looking to gut the pre-cats on the stock downpipes and use the non-fouler inserts but cant seem to find any videos on the web of a stock system with the pre-cats gutted. Unsure if its going to sound boomy or crap. Im only interested in that specific noise that the top end...
  6. pilla

    Vagcom code pull, any experts out there!?

    Managed to get the old vagcom firing on the laptop, I have pulled these codes with the ignition on and map sensor and throttle body unplugged, the EPC light was initially on before i stripped it down to replace rocker gaskets and clean some components. Any experts out there, or am i best doing...