Search results for query: *

288mm for that spec.

yes the avant and saloon are the same fitment, 2WD and Quattro are different fitments though.

The chains last, however the guides wear and fall apart, this is very well documented.

Not a problem, if you've never fitted cruise before, there is a good guide in the B7 forum stickied at the top.

Yes it will fit, don't forget you need the lower cowling as well.

It's/their on the left hand side as your standing looking at the engine.

With the bonnet open, look on the left hand side, you will see the exhaust manifold,turbo and cat. Start the engine and see if there is any noise from that area, this will start to narrow down your search.

sounds like a cracked manifold or leak in the downpipes to me.

They should be 320mm

I'm sure there is a sticky post in the B7 area, if not, use the search function it's very effective.

lucky ******!

agreed, but would look better with the Audi rings fitted.

Any S-line front end will fit, they are all the same.

2.0tfsi 220bhp model, DIS average of 36.1 mpg over the last 3k miles, a varied mix of motorway and town driving. On a long motorway run I can achieve 41.1 mpg sat at 70 being very gentle with the accelerator. Having previously owned a 2.0tdi in the saloon version, I can safely say the TFSI...

nice work, visually a brilliant result.

I have a set of 320 MM carriers calipers and hoses of my 2.0tfsi if your interested? PM me

What's your reason behind ruling out 'wobble bolts'? In my opinion you will dramatically weaken the hub by adding an extra 5 holes, the more material you remove the more the structural integrity is compromised.

I thought as much, however, it was worth asking. Good luck with your plans.

Dtm bumper for sale? PM me if so dude.

I'm running 15mm on the rear and 7mm on the front, they sit a couple of mm in from flush with the arches.