Search results for query: *

So a B7 switch will fit also as long as its not a cab?

Will a set of switches from a car with a different engine, be ok in mine? ie a 1.8 T 2003 A4 avant (or any other variant of the same body and year)?

I have checked them with a meter, and they're fine.

Thanks. It is looking like that to me also but I'm having difficulty checking it as I have no info on pins etc. The switches all 'click' as they should. Of course, that doesn't mean they work!

Hi guys, Don't want to hijack the thread but our problem is so similar it seems silly to start another. My drivers window wont go down using the drivers door switch. All others work from there except the drivers side passenger window, the one touch UP doesn't work. Drivers window didn't work...

The throttle switch is attached to the pedal and the plug is on the top. Can be quite akward to get to see it clearly. There are two little lugs which you need to gently squeeze in, to get the plug off. Checking elsawin, you need to remove 3 cap head screws to remove the switch itself (tho I...

I also have this problem. The plenum chamber mod has been done. I haven't had the coloured plugs out yet but, on checking the throtle switch, I found the plug was drowned in water and, there is water seeping out of the switch housing. I will be removing it tomorrow for inspection/cleaning. I...

Thanks, done all of the above. I haven't yet checked for voltage at the plug but I will.

My passenger side break light only works when it wants to. The amber warning light comes on also. It spends most of the time not working and just decides to work for a bit then off again. Any ideas guys? Oh BTW, a beep has just started sounding when the light decides not to work. The beep...

Yes I think I will try them, thanks.

I'm sure but I cant find any that look suitable.

Anyone know where I can get a set of securing clips for the 2 guards beneath the engine and gearbox please.

yup

:respekt: Superb!!!!

Have a search for number plate light replacement. It can be done without a new panel.

Build up of water in the plenum chamber is the most likely cause. Dont delay, get the grommet out asap. Could be very expensive for you if you dont.

Does it make any difference to the car whether I blank it or get rid of it? Hang on, if I get rid of it, I still have to blank it dont I......what is the difference?

And for my part, I was simply asking the question so I know what my options are when looking to buy one. Thank you for your input.

ok cheers guys.

So no A6 or A3 ones will fit? I doubt I can afford one right now but thanks for the offer.