Search results for query: *

Was this stopping the passenger door switch from working aswell? Thats really throwing me!

Have vag com and scanned, got no errors. Thats what led me down the relay/fuse route/wires. No wetness at passenger side!

* No windows work with switches * No windows work when hold unlock button on key * No windows work when hold unlock over on the door lock * Lights on the drivers door dont light up switches etc, and controller for the wing mirrors doesnt work? * Checked the fuses in panel side of dash for blown...

Cheers guys. What about piston bolts? Just done a full set of bottom end bearings, so crankshaft bolts would also be good!

Ahh, sorry mate. Its an AWX, 1.9TDI 130 Avant.

Hi, Im looking to torque up all the bolts on my new cylinder head bolts along with injectors and pistons etc, can anyone give me any files that have all the torque settings, maybe the bentley manual has them? Can anyone give me a link or email/upload it for me? Cheers

Got the sump off, and wondering how to remove the oil pump? Its chain driven, should I lock the crankshaft and take the drive sproket off from the pump to realse the chain? Not quite 100% sure if this is the correct way so any help would be grateful!

Hi Mate, If you take the rocker cover off, you will be able to inspect the cam. I am doing mine the now on a 1.9TDI so these pics might help you. You can see how they wear in the middle and how bad they become if it is the camshaft. You should change the camshaft, lifters and bearings if you do...

I dont mate, but I will try pick on up this week. This looks like the damage to the lifers through the camshaft wearing so might need to wait till I need to time it back up :( Completely ruined no 1 lifer... Not good to see..

Did you do this mate? How did you adjust the fuel injectors?

I need to set the timing up from scratch on my 1.9TDI PD engine, is anyone able to supply a manual or give some tips? The cylinder head isnt off aswell. Cheers

I can get a brand new cam, lifters and upper/lower bearings for around £200. I will be able to fit it myself. It got a timing belt kit and water pump 10K ago, so I will most likely just fit a new belt. Will get the rocker cover off this weekend and see if its defo a worn cam before ordering the...

Cheers for the reply. I had a look at this afternoon as I had time and had a second opinion on it, I have a worn cam shaft :( Few good details here: PD130 Cam Followers do wear sorted by R-Tek THANK YOU!!!! - uk-mkivs Camshaft lobe lifter wear on VW Audi TDI PD engine and replacement DIY The...

Anyone got any ideas here? Going to have a look at this at the weekend as now the car has a power issue when under load on the motorway it doesnt really want to go over 3000 revs!

Hi, How you all doing? I have a quick question here, I think I maybe already have the answer but looking to see if anyone else has had the same problem. When my A4 1.9 TDI is under load it is pushing air back out the engine and through the air filer intake, I have ran some Forte in the diesel...

I have tried to heat it up, still nothing. I think someone has had it apart before me - as there some of the clips on the trim were broke and bolts were lose. Will try get the part number and get a new one :(

Anyone able to help with a part number? Wipers just failed today suddenly stripped out the linkage and one side was completed seized, unable to get it free and moving so looks like I need a new one - but couldnt find a part number on it anywhere.....? Would this fit Avant 2003: Audi A4 Wiper...

I got these, they fit under the headlight where the standard ones would fit. They dont bring any errors up on the DIS. I got the 5K and my headlights were projector style. H7 Slim Fit Xenon HID headlight conversion kit: HIDs 4U If you use the code 'strathy' it will give you £30 off and total...

Haha, cheers Digger!

Yeah I know the 8e9 is for the Avant. The part im unsure on is if I buy the 8E9 807 521 G GRU is that the whole lower part that will just replace the whole grey bit on the first picture...