Search results for query: *

My A4 has the towbar fitting but unfortunately is missing the detachable part. I have tried scouring the internet but cannot see to find this part anywhere. Has anyone got this setup who could share a photo of the missing part? Or know if they would be interchangeable with other brink fittings...

2008 (08) Audi A4 Avant Sline 2.0TDI (170bhp) Diesel Manual 6 speed Silver 102k MOT: 31/8/19 Tax: £195 annually Price: £3000 Spec: Sline styling Rear parking sensors Built in sat nav (rns-e) Oem Bluetooth hands free Cruise control Ambient front interior lighting Coming home...

Thanks for your reply have been away for a couple of weeks. Yes it’s actually crazy some of the cars that are driven around with complete neglect. Although in fairness the to rear tyres are actually good tread but have slight damage to the side walls. It’s a well spec’d with front and rear...

Just got myself a nice B6 avant for a fixer up for my new ‘daily’ unfortunately only a FSI, but very high spec so all good Anyway onto the problem, so it fails on several brake issues on the rear. So my plan of action is to do discs and pads, and replace n/s rear caliper but maybe both. My...

10089

has anyone manage to source new mirror icons for the drivers grab handle ? Mine are worn and appears you can only get replacement with an entire new handle if I’m correct Photo to show which part obviously not my handle as these are still legiable 10089

Yes exactly, think getting the rears working was the drive I needed to get the front sorted. Now to get them all wired in

Cheers all managed to make good progress! So actually layed on the floor and looked at the pins on the controller and there wasn’t present in 17 (guide said post 07 would use 17 not 13) anyway that was the positive sorted. I then ran a wire from the battery for a ground a know good one and all...

Still on joy with the front, but got the rears working. Needless to say I need to get the fronts figured before I cut the rears in as that would look a bit silly Going out now to try with a different earth point

Yes.....

^^no It’s to retro fit door warning lights into the door card. From factory they are only reflectors

Yeah I’ll give another earth location a try, just a bit tedious as have tried everything several times, flicking between pin 13 / 17 for the positive but still no joy

Ha ok, I have just checked now and still no joy. I’ll have a bash at the rears tomorrow and see if any better look there! Let me know when you attempt your fronts, you post 07?

Have only focused on the front passenger so far as had the door card off for replacing the window switch. I have check the lights / loom on a 12v source so know they are good. Some post about suggest it can take several hours for the door cotroller to reconfigure

im trying to retrofit door warning lights, I have piggybacked the earth in pin 21. But not getting any luck with power, I have tried both pin 13 & 17 but nothing. I’m on a 08 plate with date of March 08 on the controller. I have tried unplugging the harness from the body of the car and also...

Just an update to say that the pair have been separated, the blow torch had no effect so removed the hub and took to my local garage who press it out, taking some pressure! Thanks for your help it made me persist with it and win in the end! cheers :salute:

Thanks for your replys! im going to take the hub off the car and give it a good pounding or take it to somewhere with something heavy duty to remove it! i have been surfing the net for a new shaft as it is rough condition compared to the n/s but my part number has rubber away after 0J1 so think...

I am in progress of changing both my CV boots and have successfully completed the passenger’s side a couple of day ago. Yesterday evening i made a start on the drives side all was going well and everything was freed apart from the shaft from the hub. i am running out of ideas of what to do...