Search results for query: *

Ive got 15mm on the rear of mine, off ebay. Black ones as the chrome/silver ones stand out too much. Black bolts too, obviously.

Yeah that's next on my list if this little £2.50 experiment doesn't go to plan :)

I know thats the best option but if I have a genuine iphone cable and i can adapt it to work with Samsung it'd be a winner.

S7 Edge :)

When I bought my car it came with the AMI cable suitable for iPhones (lightening). I have a Samsung so I am thinking of either buying a new cable, OR... buying an adaptor to go from lightening to samsung..... do we think this will work??

i know i was half way there but i couldnt get my socket into the gap, so thought about moving the radiator so I could get more space.... :) cheers its an 8mm allen bolt so I think i need a long allen key

Hi all, I want to remove the front bumper and move the radiator forward so i can get to the snub mount. I can't find any definitive instructions for putting the a4 into service mode/position? Any help appreciated. :)

So does anyone know if I need 1x non sensor mount and 1x sensor mount? or can I fit 2x non sensor mounts? I am seeing side specific mounts and the sensor one costs more, naturally. cheers

Awesome! thanks a lot for that :)

Hi all, looking to change all/any accessible mounts on my 2.5 which I think are causing some horrible shaking/clunking on setting off. First thought it was the clutch but I am now leaning to the mounts as the whole car is vibrating and it only clunks/shakes when setting off. If it isn't the...

had 2 of my cars done at morebhp, great service and great results

If the water pump was broke wouldnt that lead to overheating? not the other way around. My first thought was the thermostat was stuck open so the engine would not heat up properly.

look left of your dipstick tube, its on the left hand side of the block as you look at it. Good luck getting the screws off, Ive done 2 now and they're always a ******! :)

here's one of mine :)

lol dont be daft, it was a good suggestion as i seen alot of the same on various sites. wasnt expensive and it was my fault for not checking the holder properly! :arco:

lol yeah mate. bought a new switch, installed, and nope... after countless swearing and refitting the switch, I took the bulb holder out and low and behold the brake light bulb holder is broke. Its not holding the bulb in securley so its giving the error and obviously not working. Fixed it...

there must be mate as the indicator and reverse light are working!

just checked and its fine, so gonna phone audi for a switch :)

Prawn, take the whole bulb holder unit out, and connect it to the other side (that is working) and if it works you know its the same problem as i am having! thats how i diagnosed mine. Clach, will try fuse too mate cheers

spot on mate cheers for the info, ill have to get me a new switch :)