Search results for query: *

Hello everyone, I´m in the process of upgrading to a ported Chinafold, 3" downpipe and an AET-380 turbo but as I have a LHD APY S3 I cant even fit the V3 80mm tip let alone the V2 80mm tip. Does the AET-380 still come with the normal 54mm connection or is it just made for the V2 Tip?

First relocate this ground, make sure its proper or you will get strange interior lighting behavior. Tuck away cables as shown and remove/cut/dremel the old ground bolt out of the way, same goes for the flanges on the rear arch as shown. Now unplug the alarm, unscrew it and screw it in the...

AMSS for sale, 200£ + postage(45£ to UK) from Sweden with sub included its a MDS D4 Predator wired @2ohm rated at 500w rms(https://www.mds.se/ps06500d4.html) Pros of this box over others is ease of fitment on Quattro cars and that you can keep cd changer. There is also a full installation guide...

Hello everyone I recently installed illuminated vents on my pre facelift S3 (1999) and I thought id share some useful information for others who might do the same. First off the wiring you can run it however you want but keep in mind that you will need to drill small holes for each cable set...

Where is everyone getting their floor mats from nowadays? I've tried a few aftermarket alternatives at this point and all have cheap material and very hard edges leaving permanent marks. Had a look at Audi tradition for OEM ones but turned up empty.

Drives just fine its just the idle. Checked all vacuum lines and plugged the intake manifold. Maybe catch can only goes one way and I routed it the wrong way around?

Hello everyone, I have a strange knocking noise coming from the engine compartment when only the ignition is on (also continues when car is on for a bit). Any ideas on what could be the cause?

Hello everyone. Drivers side door will not properly shut sometimes and you will need to apply pressure from the outside to shut it eventually as it gets progressively worse. Lubricating with WD40 solves this issue for a few weeks at best and I'm wondering if its the lock I need to replace and if...

Hello everyone, my headliner is saggy and I am planning on redoing it where could one find new trim for the headliner? Or can you just re-glue the old headliner? In other words does anyone have any glue, headliner or other material they could recommend? I found this...

Hello everyone, Ive been looking for a 3" tip for a while for my non ESP APY LHD car. Ive tried B5 v3 (non esp) and HG-Motorsports tips and non are close to fitting... Would i need to fabricate myself a tip or is there ANY that would fit? Picture is of the standard non ESP APY tip.

Hello! Recently installed AMSS and now with all this bass the door handles rattles alot. Ive had a look behind the door panel/cover and cant find any way to tension it... Ive read that there is some sort of spring I need to replace where can I find this?

ive been looking for a wiring diagram for my Audi S3 8L -99 Full Bose (all speakers connected to the standard Bose amplifier) and i cant seem to find anything useful. PLEASE HELP!