I will have a think on what I want to do, I would do a rebuild if I was going to do rings etc
If not, the brother can buy it
Yeah mate the cams and follows seem fine, I know you can't be 100% until the head is off but the chain and belt all seems fine aswell,
So all in...
After a breakdown last week And some research and finally a compression test today it's official
Low compression on all cylinders
I need the clutch kit today if possible so don't have time for bill to send me one,
So oem all the way
Il look now
I was thinking last night I think I'm just going to oem
And for that reason you mentioned, some people have loads of power and are fine so I will be
after doing more research...
1. (if it fits) abf flywheel + vr6 clutch
2. oem DMF + clucth kit ( will this cope with my future plans)
just broken down, which what i thought was limp mode. the car kept loosing drive but not engine power, felt like sticky vanes from a pd130 engine....
Vibration through gearstick
I've got vibration when using the clutch to move off
No whining or nothing from the box, and pulls fine so guess it...
Just to hijack
What would be the symptoms of a worm dual mass ??
I'm getting bad vibrating when pulling away slowly
Got a few bits of tools mate, so should manage in that aspect.
It's the access part in more unsure about, btw I have a Quattro sport with a...
Good answer mate Ha
Just been out, had a look, I've git axels stands and ramps, and got all weekend to do it. So shouldn't be too hard.
Found the answer so can be deleted
can the 3" downpipe and decat be fitted on a driveway with Ramps? Without dropping the subframe ?
Might do it tomorrow if possible, if not il...
Bill I never knew the stock pipe size hence the question. I totally agree and understand that bigger within reason is better.
Il probably stay...
Well my goal was about 230-240 ish.
The inter cooler I was going to buy was toyosports eBay one,...
I didn't know the oem pipe size, but yeah totally agree
Il stick with 2.5"
You don't ask you don't know I suppose
I'm not aiming for mega power, on my 20vt qs
I'm ordering an fmic tomorrow and I have several metres of 2inch stainless lying around and was...
Mate is the one you're on about
I've just seen the forge ones on awesome gti which seem a bit over priced
Cheers bill, does a ko3 tip fit ?
Or if not what are people using?
It's time to start gathering some parts together but I have a problem with getting the right tip
I have an ARY engine code 2001 a3 QS
Separate names with a comma.