Search results

  1. S

    Oil change?

    Thanks aragorn. Great advice
  2. S

    Oil change?

    Thanks for the replies. It's a 2.8 30v. 142k on the clock. The problem was with lower revs yes, and hills. No smoking at all. I've put the hesitating down to just a quirk with the engine, I've read so much about it on here and it could be a multitude of things. Certainly not something...
  3. S

    Oil change?

    Morning all, After driving home yesterday I noticed the car felt quite sluggish, it was labouring quite badly in higher gears (sort of jerking) and didn't feel as responsive. I have an issue with the car hesitating slightly before pulling but it seems to be getting worse. Anyway, I decided...
  4. S

    Quick question if I may, regarding facelift lights

    Great stuff, thanks for checking for me. Now just to tidy everything up and check the connection again. Thinking about getting some fogs put into the bumper too.
  5. S

    Quick question if I may, regarding facelift lights

    Afternoon all, A quick question regarding facelift headlights if I may. I've just wired up 7 pairs of wires and I'm a bit concerned. As you look at the passenger side light, the bulbs in order from left to right should be: - Main beam - Sidelight - Headlight - Indicator Is that right...
  6. S

    Facelift headlight wiring looms

    I most certainly will do. This has proven to be a bit of a ballache to be honest but I'm sure it'll be worth it in the end. dieselfitter - if you have the part numbers for the wires that would be great, would save me a lot of hassle. The Audi staff near me don't seem to be the brightest...
  7. S

    Lowering and alignment, which order?

    I don't think mine will end up as low as yours :) I just want to take some of the gap away between wheel and arch, it looks a little bit strange at the moment :S
  8. S

    Lowering and alignment, which order?

    Thanks for clearing that up for me :)
  9. S

    Lowering and alignment, which order?

    Hi all, I'm thinking about dropping my car on some H&R or Eibach springs. Would it be best to get the car tracked and aligned before I get it lowered? Or doesn't it matter too much? The car has had new 18" S4 alloys since. Cheers Dave
  10. S

    Facelift headlight wiring looms

    Right, having sourced the plugs, where is my best place for some wires? Should I just call Audi and explain the problem to them hoping they'll send the right ones? Or can I make them up myself?
  11. S

    Facelift headlight wiring looms

    Looks like a fine job! I can't wait to get mine done.
  12. S

    Facelift headlight wiring looms

    I'm not sure if I've purchased just the plug housing itself, or anything more? When you say the wires have plugs on the end, do you mean pins? You then thread these into the plug and that's it.
  13. S

    Facelift headlight wiring looms

    Right, have sourced the plugs, now I just need some wiring. What sort am I after? Does it have to be of a particular quality/gauge? Getting there... sloooowly.
  14. S

    Facelift headlight wiring looms

    Thank you all for the help. I'll give Audi a call tomorrow and see how much they want :(
  15. S

    Facelift headlight wiring looms

    I have called loads, they are like rocking horse droppings it seems :(
  16. S

    Facelift headlight wiring looms

    I've seen that, it's a tad expensive to be honest. All I need are the plugs, not the whole loom itself.
  17. S

    Facelift headlight wiring looms

    I wondered if someone could please help. I need to know the part number for the above. Have spent ages on Google and on here trying to find it but to no avail. When I ring Audi I tell them my reg and of course it being pre-facelift they get all confused when I tell them I'm after a facelift...
  18. S

    using spacers on a quattro

    I got mine from DPM Performance. Great service and great spacers.
  19. S

    using spacers on a quattro

    I run 10mm per axle and things seem fine. No problems at all.
  20. S

    Wiring up facelight headlights - I think mine are different?

    Thanks for your help again aragorn, much appreciated. I'll scour the internet and see what I can dig up, or get myself to a breakers.
Top