Search results

  1. g10chy

    S3 Brake Question - which pads and discs

    I have just bought the following for my front plus new OEM rear discs and pads. Getting them all fitted on Wednesday!! £190 for DS2500s + 1.5 litres of Motul RBF600 from Larkspeed.com £80 for Pagid front discs from Euro Car Parts
  2. g10chy

    New brakes needed....what setup?

    What benefit do you get from bleeding the clutch? My cars booked in for major service and brakes on Wednesday so will ask them to do this at the same time.
  3. g10chy

    Audi Recall ( all petrol engines)

    Nope didn't recieve anything. That is why i asked them specifically if anything had been done to which i got a reply "No further outstanding workshop requests". Didn't even get a list of ridiculous expensive recomendations either, which isn't normal for Audi!! Waiting for a call back with...
  4. g10chy

    Audi Recall ( all petrol engines)

    Just got mine back from Crewe Audi. Didn't tell me if any of coils were replaced...but i now have some small scratched on each corner of my front bumper that werent there yesterday when machine polished my front end!!!! :wtf: Going to phone up and play hell shortly, they best sort it.
  5. g10chy

    New brakes needed....what setup?

    Cheers again Westle!!! Already found this on the forum.
  6. g10chy

    New brakes needed....what setup?

    Nice one Westle! Everything is now ordered: £190 for DS2500s + 1.5 litres of Motul RBF600 from Larkspeed.com £80 for Pagid front discs from Euro Car Parts £47 for Rear discs & pads (Bosch) from VWspares.co.uk £317 total :thumbsup:
  7. g10chy

    New brakes needed....what setup?

    Also, how much Motul RBF600 will i need?
  8. g10chy

    New brakes needed....what setup?

    Anyone got the product code for DS2500s for S3? Also, where is the best place to purchase? Just bought some new Pagid fronts and got a free 5pc spanner set from Euro Car Parts!!
  9. g10chy

    New brakes needed....what setup?

    Will OEM spec discs be ok with DS2500 pads? Not too aggressive for the disks?
  10. g10chy

    New brakes needed....what setup?

    Already looked through that sticky reesyboy. I have everything choosen except front discs now...I want a good plain set. What are the recommendations?
  11. g10chy

    Audi Recall ( all petrol engines)

    Just booked mine in for Monday at Crewe Audi.
  12. g10chy

    New brakes needed....what setup?

    Hi, I needs new pads and discs for my MOT. What the best set-up on a budget? Pads? - DS2500's seem the best choice of pads. Should this be front and rear or front only? Discs? - What discs should I go for front and rear? I swear i read somewhere on here that may as well leave the rear set up...
  13. g10chy

    Finally found some decent BBS CH Replicas but.....

    Hi Guys, It's been awhile since I last logged in but previously I was searching everywhere to get some decent BBS CH replicas without the additonal small holes in between the stud holes. Anyway...I think i have found these now :laugh: My original plan was to get 18x8s et35 all round but this...
  14. g10chy

    VAG COM

    I have also PM'ed you!
  15. g10chy

    Dump Valve Fitting????

    Yeah...straight swap mate!
  16. g10chy

    Dump Valve Fitting????

    Agree again...I have a 007p fitted with panel filter (rather loud) and my mate had a Forge Split-R which re-circs just enough air to stop the engine going into limp mode but still get a slight atmospheric dump maybe have a look into one of them if its the tishh you are after.
  17. g10chy

    Duty Calls (COD SPoof)

    A mate just put this on Facebook....Brilliant!!!
  18. g10chy

    Jetex filter install help please!

    I don't have that either!
  19. g10chy

    S3 running problems, maybe?!!

    No problem...Sorry to hear that dellboy! Persever with it, im sure there is nothing serious if it just feels abit low on power. Could be as simple as new MAF or boost leak.
Top