Changing your cam cover can been done on the ground it's quite simple intake removed throttle body cleaned ,I would think if the pcv was faulty you would hear it .
You could try TB adaption with vcds also log your airflow ,I take it your air box and filter are good.
I have been scouring the net for answers I have found most online however I am still unsure about connecting to the can bus and the positive feed to the camera module without cutting into the head unit harness, the car is still under warranty and would like to keep it factory ,it would be...
Can anyone give me instruction on how to enable auto folding mirror's and remote electric boot closure via the key with vcds, totally struggling with it.
The car is a 2014 Passat executive estate
To be honest if the solicitors get a enough names to act on it is possible that a lot of damage could be done to vag meaning we could all be driving about in cars with limited support just like those who bought mg /rover as they folded.
Ok vw is worth billions but it looks like they need that...
hi I have recently bought a 2014 b7 Passat executive estate dog it is fitted with auto lights however I want to enable the auto wipers I found a guide online but I can't seem to find the option in the module
I don't think your guy would have fully charged it without running it as once the system equalises with the cylinder pressure he would have to run it to pull the suction pressure down to complete the charge
I collected my b7 estate today it is fitted with keyless entry for the doors I thought it meant I could open the boot by waving my foot under the bumper ,however I think it doesn't have the feature and wondered if I could retrofit this ?
Sounds typical of moisture in the system as it forms a blockage of ice at the expansion valve and will clear when the system is off al if melts however it could also be a faulty expansion valve ,it may also be worth trying changing the drier and giving it a really good vac to dry the system out
Its kind of a funny one but providing it is operating normally on the controls side would say that your system is choking with moisture especially if it was to work when you first switch it on after an extended off period
have you checked the clutch is getting a supply. Also if your clutch is engaged you will see the center spin you could have issues with sensors such as your g65 hp sensor a scan with vcds would show this