Get one in a carrier though. So much easier
Black. Always best.
That's how I've done mine.
You can easily pull off the hub from the bearing. Them i used a slide hammer screwed into the bearing carrier to pull the carrier away from the...
For sheer ease and simplicity. Get one already in a carrier.
Yes they're held in by 4 bolts, but yes they can seize in.
Takes less than an hour to do even if seized.
Sounds like a vacuum leak to me.
What kind of mpg do you get?
Yeah the pulleys were fully turned over.
Its driving nicely but instead of 48+mpg it's returning low 40s.
How should the measuring block react?...
Reving the car doesn't make it flick but when it's started cold the torsion isn't on 0.00 so I'm assuming it is correct?
Which way do you turn...
Finished work today and it was idling like a pig and it stunk. Rev when standing and it would puff smoke.
Got it warm and plugged in the laptop....
Cheers Everyone. I'll let it settle in over the next few days then I'll have a look. So it's just a matter or letting the car run until it's...
I've just done the cambelt on my car. All gone smoothly and I've got the torsion value to 0.35 which seems nice to drive. I read...
Isn't the sat nav bit in the boot?
I replaced the spring on my other halfs A3 last year after it snapped. After I replaced it, I noticed there was a creaking noise....
Hold the spring on that side and spin the wheel. You'll feel vibration through the spring.
The guage iirc is set to show 90 even when its below and above to stop people worrying. So if it's that low. It may be even lower. Just change the...
Thank you. I'll get one ordered.
Separate names with a comma.