Search results

  1. evomaster3000

    Retrofit DIS dash cluste from A4 B5r to A6 C5 1.9 TDI, help with wiring

    I'm trying to retrofit a cluster from a 2000 A4 B5 to my A6 C5, i've fitted and now wired the stalk in, that works correctly, the question is what do i connect the other pins from the 20 pin connector to? Any ideas where i can get a wiring diagram for a DIS enable car? I'm waiting on my...
  2. evomaster3000

    Retrofit DIS dash cluster to A6 C5 1.9 TDI, help with wiring

    I'm trying to retrofit a cluster from a 2000 A4 B5 to my A6 C5, i've fitted and now wired the stalk in, that works correctly, the question is what do i connect the other pins from the 20 pin connector to? Any ideas where i can get a wiring diagram for a DIS enable car? I'm waiting on my...
  3. evomaster3000

    Help coding a A4 B5 DIS cluter to a A6 C5 (non DIS) fuel gauge adaptation value?

    I'm trying to retrofit a new instrument cluster from a 2000 A4 B5 to my A6 C5, i had it lying around and it didn't sell on ebay so i thought i's give it a shot. I'm waiting on the code for the full lisence for VCDS (to recode the ECU to the new cluster and key), but one issue is that the fuel...
  4. evomaster3000

    Gearbox issues on 1.9TDi Q, can't select 5th???

    I've been having a look under my A4 as I can't select 5th gear. I'm thinking that the gear linkage is worn and won't move over enough to select 5th, I can get every other gear and the selector linkage is bolted on securly. The car has done 180k, Anyone else had this issue?
  5. evomaster3000

    Hi all, Just bought an A4 Avant TDi Quattro, gen on some issues

    Hi all, My first post in the A4 B5 section as i've just bought this off ebay: http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=220604395339&ssPageName=STRK:MEWNX:IT I'm usually on the A6 C5 section having owned and built my 1998 A6 1.9TDi over the last 6 years. Anyway the A4 has...
  6. evomaster3000

    S-Line 3 spoke wheel fitted to my A6

    Just a small relativly quick mod, didn't cost too much either. After the shinanigans with buying an old wheel of an A4 which didn't fit I managed to sell it easily on ebay for a slight profit and purchase a newer one with the correct fitting. Upgraded to an S-Line 3 spoke leather steering...
  7. evomaster3000

    Anyone upgraded a steering wheel on a C5 A6?

    I've just bought a 3 spoke steering wheel from a 1997 A4 S-Line and taken mine off to find it won't fit :-( I thought the spline fitting would be the same due to both the A4 and A6 of that era having the same 4 spoke wheel, therefore the 3 spoke would fit either. Obviously i'm wrong...
  8. evomaster3000

    1.9 TDI AFN 110 boost control problem, help

    Just wondering if anyone can help, got a boost control issue since i've cleaned out the VNT. Anyway my issue is this, I have a boost guage fitted so i knew previous pressures etc, since i re-built the head and cleaned out the turbo it's been high boosting 20+psi @ motorway speeds on full...
  9. evomaster3000

    Latest addition to the Audi - Roof rack

    Well as i plan to do RTTS this year and use the car for some watersports in the summer i need to be able to transport my surfboard and windsurfing gear. So a roof rack is neccesary! Managed to get a genuine Audi one (rrp £185 + VAT n del) I got £50 off the bay incl P&P, and decided to...
  10. evomaster3000

    Help after new head gasket, loosing water??

    I've just done a complete head overhaul and got it all back together, fitted new water pump while i was there and i've refilled the coolant, anyway basicially i filled it up slowly to let all the water get through the system after a full clear out. But the issue now is after getting her...
  11. evomaster3000

    Update on some engine work I've been doing: (1.9AFN)

    Well apart from tinkering with the install, since i'm now studying a motorsport degree, i now have more knowledge of engines and turbo's etc, so I've been intending to do a head re-build on the audi, so i set about it late last year. Started by stripping the turbo and manifolds off for a...
  12. evomaster3000

    Some of the engine work i've been doing: (1.9TDi)

    Well apart from tinkering with the install, since i'm now studying a motorsport degree, i now have more knowledge of engines and turbo's etc, so I've been intending to do a head re-build on the audi, so i set about it late last year. Started by stripping the turbo and manifolds off for a...
  13. evomaster3000

    Head gasket fitting on AFN 1.9TDi

    I'm going to be fitting a new headgasket soon after i've cleaned up the head and replaced stem seals, relaped valves and cleaned carbon etc. Just wondering if i should use any sealing compound between head gasket and head/block? If so whats reccommended? Not done a head on a diesel...
  14. evomaster3000

    Roof rack/bars??

    I'm after some roofbars for my Audi so I can go surfing when the weather picks up. Anyone got any reccommendations? I want ones which won't damage the paint or bodywork as i think most fit by clamping to the roof by the door tops? Also if anyone has got one going spare they wanna sell...
  15. evomaster3000

    Some help with Head on AFN 1.9TDi

    Right My 1.9TDi lump is on 170k going fine but is in need of some TLC, It's sounding very tappy from 1 or 2 tappets. Got a number of options don't know what to do really Basicially, can these tappets be shimmed? If so is it worth it or rull recon of head. 2nd the Cam? thats not included...
  16. evomaster3000

    Fitting S6 twin pot calipers to A6

    Right i've had these calipers and new discs for a while now, cost me £300 so far with new braided lines etc. Been meaning to fit them but basically they don't straight bolt on, I've been looking in to getting a braket made up specially but i've looked in to it a bit more and was thinking will...
  17. evomaster3000

    A6 Workshop manual

    Can anyone reccommend a good workshop manual for my 98 1.9TDi A6? Looked on the bay and there is loads of download ones but i want a good one, and well spoilt for choice. Or if anyone has one they've got on file that they could send me i'd be happy to purchase a copy. I'm looking to...
  18. evomaster3000

    Just ordered my Xmas pressie

    Not directly car related but: Fed up of waiting to borrow my dad's compressor so got this lil lot. Now i can crack on with the fibreglass install and get that sprayed up and do any lil touch up bits to the car over the winter. Just gotta save up for paint n materials etc.
  19. evomaster3000

    Need a Cylinder head for AFN 1.9TDi

    I'm in need of a cyclinder head for my A6 1.9TDi as i want to do some work on it for Uni and would be good if i could actually use it on my car, So anyone know a decent breakers or place i can get a complete cylinder head for an AFN 1.9 TDi Audi lump? Am in process of trying the online...
  20. evomaster3000

    Problems with remote locking/alarm, help

    I've had a couple of gremlins creep in to my car! Or at least thats the only way to describe it! Got a few problems with the locking system as when i unlock/lock the car sometimes the car then locks and unlocks itself a few times and sometimes the windows go down aswell but sometimes not...
Top