Search results

  1. Blurtar

    Footwell Lighting B7 Cabriolet

    Same issue for me, only 5V at the interior light.
  2. Blurtar

    Cabriolet Footwell Lights

    Looking for some help with footwell lighting on my cab. I retrofitted footwell lights to my 2006 Avant using the interior light which work fine. However on my cab the interior light has a 5V feed for the door open trigger live. I’m thinking of using a door open live from the drivers door...
  3. Blurtar

    New thermostat but no hot air

    This common situation can be easily avoided when filling with new coolant On the B7. Unscrew the expansion tank from its mount, unclip the level sensor and raise the tank as high as you can whilst slowly filling. This method ensures the highest point on the system is the expansion tank. I...
  4. Blurtar

    seat belt occupancy sensor,

    I’ve recently completed this mod and had the same issue, the half leather was from a B6 in to mine which is B7. I transferred the seat belt holders from my stock s-line seats as they are wired on b7 but not on B6. I also transferred the seat pad sensor from the passenger seat. lights went...
  5. Blurtar

    New master cylinder fitted , very soft pedal to floor

    I feel your stress! I had this last week on exactly same spec as your car. I replaced all four brake flexis on my Avant along with new cunifer tails on the front calipers and a joint to make on a seized union on the rear. All went quite well until bleeding the brakes. Used a pressure bleeder on...
  6. Blurtar

    Door warning lights retro fit not working

    I don’t know whether this is linked or not but when I retrofitted mine to my Avant the door lights worked but the mirror control ceased working! For some reason on mine where the earth pins were shared in the plug this happened but when earthed away from the pin everything worked! Might be...
  7. Blurtar

    Cruise control & DIS install issues

    Obviously not wanting the help offered then......
  8. Blurtar

    Cruise control & DIS install issues

    Bring it around here I’m in Leeds, I retrofitted both cruise and Washer level on mine.
  9. Blurtar

    S Line Suspension 'Oddities' ?

    I replaced my front full set of arms earlier this year and the only thing different with the s line was the track rod ends to standard which comes in the kit. Good luck with the pinch bolts by the way!
  10. Blurtar

    Aircon Issues

    My compressor was totally wasted, I tested it off the car and the clutch just made the faintest click when 12v was applied. On replacement of the compressor I regassed the system and everything fired in to life. One thing for certain, you have a deffo fault if the econ light doesn’t switch off.
  11. Blurtar

    Aircon Issues

    Recently repaired mine, had to do the compressor, pressure switch and condenser. I understood it if the compressor is faulty the fan doesn’t kick in, mine didn’t until I’d replaced the compressor.
  12. Blurtar

    Audi part number

    Why not use a fuse piggy dash cam kit. Cost around £10, for the full kit.
  13. Blurtar

    AC/Evaporator drain off.

    It would have been a couple of weeks ago!
  14. Blurtar

    AC/Evaporator drain off.

    I’ve got this too after a full A\C refurb. I’ve bombed it on recirc but still have a smell. I’ve not noticed any run off under the car either when in use which should be happening.
  15. Blurtar

    A\C & Cooling fan

    Dodgy wiring plug on the A\C compressor.
  16. Blurtar

    A\C & Cooling fan

    Now sorted.
  17. Blurtar

    A\C & Cooling fan

    Am I correct in thinking the a/c does not engage if the fan module is faulty? I have replaced the compressor, condenser, Pressure sensor and regassed the system. There are no leaks and the Econ light now stays off. I can get the fan to work via VCDS with output test in the engine module but...
  18. Blurtar

    G65 A\C Pressure Sensor

    Having a bit of a mare with a replacement pressure sensor. None of the new ones I’ve ordered match the genuine Audi one I have removed. Can anyone advise if the valve part of the switch has been modified on later switches coming back to the original part number? Thanks
  19. Blurtar

    Retro Fit Warning/Puddle Lights A4 B7 Salon - How To

    I have done in pin 21 which is earth.
  20. Blurtar

    Central locking

    I have a fault on the central locking that I’d like to sort. I now have a working siren after replacing it due to the battery leak issue so that’s sorted, however, the one remaining niggle is that the central locking doesn’t unlock when the key is removed from the ignition. Everything else works...