Search results

  1. jamiebennett81

    New 3.2 V6 owner

    Been on here for a little while, originally with my old Seat Leon Cupra stripped out build. Sold that on a while ago, and now just picked this up. 2004 A3 8p 3.2 V6, 104k on the clock, drives lovely. I don't see many of these on the road that much. Few bits going on it already, pressed...
  2. jamiebennett81

    Fitting a Quick Release Steering Wheel - Issues

    Trying to fit a quick release steering wheel to a 2001 Seat Leon Cupra but clearly I am missing a component Steering wheel hub adaptor I'm guessing? I presume I need to remove the spindle, fit a short hub kit in which the quick release kit then fits to? Something like an NRG kit is needed:
  3. jamiebennett81

    Lëon OEM+

    Finally got some updated pictures with the new bumpers on Leon5 by Anthony Walstow, on Flickr Leon4 by Anthony Walstow, on Flickr Leon3 by Anthony Walstow, on Flickr Leon1 by Anthony Walstow, on Flickr Leon7 by Anthony Walstow, on Flickr Leon8 by Anthony Walstow, on Flickr
  4. jamiebennett81

    Top turbo bolts working loose.

    WTF are those! OEM bolts and if required, nordloc washers too.
  5. jamiebennett81

    Ignition timing, log 002,003,031 any help would be awesome

    Where are you based? Personally if you are struggling this much then take it to a well respected tuner, like AMD, Badger5, R-Tech, AKS Tuning etc, as from reading lots of your threads, it sounds like you are going round in circles.
  6. jamiebennett81

    Rolling Road Day TAKE 2 @ AMD Essex - 26th April - 2015

    Can't even spell my car right, Seat Leon "Cupra" :moa::lmfao:
  7. jamiebennett81

    OBD II WiFi and iPhone or Android

    ha, thanks mate :)
  8. jamiebennett81

    DP cat delete, o2 sensors

    Have you checked your DV? What happens if you unplug your N75 and just run off actuator pressure?
  9. jamiebennett81

    OBD II WiFi and iPhone or Android

    Depends where your OBD port is. Mine is loose as I run a stripped car, so mine sits by the gear stick, some others sit underneath the dash where the pedals are its about 8-10cm, quite small and not intrusive, so you should be ok.
  10. jamiebennett81

    OBD II WiFi and iPhone or Android

    Yes any OBDII car (although I have only tested on VAG cars).
  11. jamiebennett81

    Maf sensor ?!?

    When it idles, does the idle remain steady or does it fluctuate? If the revs are dropping upon pulling away, have you checked all the pipework for a boost leak
  12. jamiebennett81

    DP cat delete, o2 sensors

    Have you not answered your own question, that when you switched to an aluminium setup you started having issues? Has the cat been mapped out also?
  13. jamiebennett81

    OBD II WiFi and iPhone or Android

    lol sorry, it does plug into the OBD port, I just meant when I had finished with it and unplugged, it fits nicely into the door pocket
  14. jamiebennett81

    car feels flat after gear changes

    As Bill said, DV needs servicing or replacing Do you still run the standard TIP? Old ones are known to become weak and collapse between gears, causing a hesitation between boosting
  15. jamiebennett81

    OBD II WiFi and iPhone or Android

    Yes I have this for my car and it works well. I use the dashcmd app on my iphone. It's comes most in handy when my engine management light comes on (usually due to a solenoid I have not finished off yet), so I can read and clear errors on the move, and the wireless tool fits nicely in the door...
  16. jamiebennett81

    Cold air intake experience?

    clamps like this: http://www.ebay.co.uk/itm/Genuine-Mikalor-W2-430-Stainless-Steel-Worm-Drive-Hose-Clip-Clamp-Clips-Clamps-/191114294151?pt=LH_DefaultDomain_3&var=&hash=item2c7f4cb387
  17. jamiebennett81

    Maf again, wtf??

    When you say new Bosch unit, where did you get this from? From a main dealer or somewhere like Euro Car parts. Only reason I ask is ECP MAF's are never properly calibrated, and throw up further issues proven by Niki at RTech when mapping cars, they never read correctly. Only buy MAF's from a...
  18. jamiebennett81

    Cold air intake experience?

    Well enjoy it mate, it's loud lol. Only thing I would change is those nasty jubilee clips for some mikalor ones or any decent clips. I have used those cheap clips before included in kits like this and they often rust and fall apart or the threads running around the clip cut into the silicon...
  19. jamiebennett81

    Rolling Road Day TAKE 2 @ AMD Essex - 26th April - 2015

    Put me down for this. Seat Leon Cupra. By the way, having attended many AMD RR days, lists of people running and prepaid doesn't work and it always goes on who ever turns up first and pays AMD direct on the day gets on the rollers as often enough lots of people drop out or don't show. I'll pay...
  20. jamiebennett81

    Cold air intake experience?

    This kit is a cheap remake of the Carbonio kit years back. I had this on my leon when I first got it years ago. It was the loudest air filter setup I have ever heard on the 1.8T car, sounding exactly like my atmospheric dump valve I had on my RS Turbo years back. It did sound nice....initially...
Top