Search results

  1. S

    Aluminum Door trim with LED lighting PNs?

    Does anyone know the genuine Audi part numbers for the Brushed Aluminum LED door trims please? :)
  2. S

    MIB Upgrade

    No worries. Sadly, I do not know whether you can code the same as in VCDS. You have to completely remove your phone from the Audi system and let it pair with the Bluetooth of the CarPlay unit, otherwise you’re never going to get audio working fully, after you’ve fixed the AMI/Aux issue I gave...
  3. S

    MIB Upgrade

    So if you have an AMI socket in your centre console storage box, you need to disable AMI, and enable AUX as an input instead. https://integratedautomotive.co.uk/activating-aux-input-on-audi-mmi-3g-and-mmi-mib1/ Sometimes the mmi will change the source so you have to deselect AUX/external...
  4. S

    MIB Upgrade

    Btw anyone who has any audio issues, this is due to AMI being active and AUX not. Recode via 5F using VCDS. ‍♂ quite happy with the box from Bavarian Automotive. Need to see if there is sound limiting as volume levels seem quieter but nothing major.
  5. S

    MIB Upgrade

    Hoping one of you can help... I bought the exact same CarPlay unit from the same seller. I have it all wired in to my MMI(MIB), CarPlay shows up and MMI centre console controls work, but I have no sound from my phone when playing music. When I go to INPUT settings on the MMI, AUX input is not...
  6. S

    [Guide] Audi A3 8V Genuine LED Cupholder Retrofit

    I've already wired it into the BCM now. I just want to know VCDS codings so it is on all the time...
  7. S

    [Guide] Audi A3 8V Genuine LED Cupholder Retrofit

    Hoping someone can help... LED cupholder is installed (BCM) and working, BUT only when the ignition is off or the doors are open. As soon as I turn the ignition on it turns the LED cupholder off. Can anyone tell me how to have it 'on' all the time via VCDS coding? Thanks!
  8. S

    [Guide] Audi A3 8V Genuine LED Cupholder Retrofit

    All installed and controllable via MMI
  9. S

    Stuck wire terminator in BCM?!

    When altering some BCM wiring, a wire terminator has got stuck in my BCM, but the wire not, and I cannot get it out ‍♂️ I have ordered some termination removal tools (arriving tomorrow), but can anyone tell me the correct name of the wire terminators used for wire into the BCM, so I can buy...
  10. S

    [Guide] Audi A3 8V Genuine LED Cupholder Retrofit

    I fitted the RocketWires BCM loom and rings today. I was a little worried (like a lot of others) about the melting of tabs, but took my time and it’s fairly easy. What I did was melt the bulbous area of the tab, but also melted a line down the centre which helps separate the tab from the joining...
  11. S

    2015 A3 1.8 TFSI OEM Air Filter box small rubber pipe/tubing connected on the LHS of the box?

    I just went through the annoying process of fitting a new RamAir induction kit to my 1.8 S-Line, and I got to the very last step of connecting the thin rubber tube into the LHS of the new air box, and it doesn't reach by 1-2"! To say I was annoyed was an under statment haha! I have no idea...
  12. S

    Aftermarket exhausts for 1.8 TFSI non-existent?!

    After searching and searching, I can find now Cat Back systems for the A3 8V 1.8TFSI. It's like this model just had no after market exhasusts created for it... I can find exhausts for the 1.4 tfsi, 1.8TSI (which must be nearly idenitcal?), just not my exact model. Has anyone fitted an after...
  13. S

    Is there a single split tailpipe (1-1, not 2-2) diffuser for the A/S3 8V?

    Thanks boys! My knowledge of exhaust compatibility is next to nothing, but am I correct in assuming that for all intents and purposes the following exhausts would fit my 1.8TFSI? Milltek Cat Back 1.4TFSI Milltek Cat Back 1.8 TSI
  14. S

    Is there a single split tailpipe (1-1, not 2-2) diffuser for the A/S3 8V?

    Hey all, Haven' really posted much lately, but I have a 2015 1.8 S-Line (ECU and DSG remapped), and I'd like to fit a singular split exhaust (not S3/S3 style), but I have seen no diffusers, and only examples of this done on an 2015 A3 saloon. Any info or help appreciated! Many thanks Si
  15. S

    Post Pics Of Your A3/S3 8v In Here

    Fitted the rs grill this weekend. Getting the original grill off the front bumper was a royal PITA https://share.icloud.com/photos/0hhjBAWx3HvSx8JIqGU2jSXVQ
  16. S

    Chrome deleting window trim using spray paint?

    Looks good. Definitely thinking about PlastiDip or paint spraying. Easier to Mask off areas than risk scratching paintwork.
  17. S

    Chrome deleting window trim using spray paint?

    Obviously, a lot of people de-chrome their window trims using wrap, but I don't like the idea of wrapping it as it's fiddly and I'd be scared of scratching my paintwork due to being too heavy handed haha. Has anyone every primed and sprayed their window chrome black? IF anyone knows of anyone...
  18. S

    Fitting the RS3 Grill (Guide)

    So I’ve been eyeing up an RS grill the last few days and then came across this post. Has anyone completed this in Kent? And if I don’t find the time does anyone know where I could get it fitted in Kent? Thanks Simon
Top