Search results

  1. N

    Turn signal constant 12v

    Hi guys, Hopefully someone can help with this issue as I'm scratching my head. Long story short, I have a 8P2, which the previous owner has changed the front end to 8P3. The car has turn signal errors for Left/Right. Upon switching the car on the indicators will flash fast until the car has...
  2. N

    DSG flashing PRNDS

    I have no idea mate, this is what i'd like to find out, rather then everyone just say mechatronics. If i press the switch the car is back to normal.
  3. N

    DSG flashing PRNDS

    This is what im thinking. People keep saying all this mechatronic unit etc however my car has no other issues. Gears are silky smooth, it pulls off fine no snatching or anything. All gears change correctly 1-2-3-4-5-6, and back when stopping. Im sure id have my issues if there was a bigger...
  4. N

    DSG flashing PRNDS

    So whats stopping me continuing to drive the vehicle, whats the worse case scenario being the car is working perfectly. Everybody keeps saying mechatronic yet the car is fine and when the switch is pressed its as if nothing has happened
  5. N

    DSG flashing PRNDS

    So what's this mechatronic unit? I'm thinking if I do something to make that switch held down all the time or take that switch off and solder the circuit closed the car will be fine. The car poses no issues at all other then the display flashes, would I not have a few more symptoms of there...
  6. N

    DSG flashing PRNDS

    Hello all. So i purchased a 3.2 DSG around 3 months ago now an done around 4000 fault free miles. However recently I noticed the issue as titled, I stopped put the car in park, then back in drive and carried on with my journey with no more faults. However recently this issue has...
  7. N

    Facelift vs Pre facelift

    Yes you need new bonnet and slam panel.
  8. N

    Xenon DRL wiring Kufatec

    I've already got facelift front, as per the OP I would like to know where the extra wire on the xenon conversion harness goes.
  9. N

    Xenon DRL wiring Kufatec

    I would also like to know this, I have a 2006 with a retrofit MY10 front however have halogen lights an would like to change to xenon also.
  10. N

    Symphony II ISO Pinout colours

    After studying current flow diagrams on elsawin I have managed to resolve my issue. For anyone finding themselves in my situation in future I'll share the relevant information. This applys to my late 2005, non Bose with rear amplified speakers. There are 2 wires I haven't worked out, one is...
  11. N

    Symphony II ISO Pinout colours

    Yes I am aware of the radio antenna, this doesn't bother me as i have retrofitted the aux into the unit. I can repair it, if some body is willing to provide the information i require to rewire a new ISO connector into the car. Hopefully someone will kindly share the information.
  12. N

    Symphony II ISO Pinout colours

    Hi People Recently bought a second hand A3 8P 55 plate, few issues which I'm looking to resolve, a few i have discovered relate to the stereo within the car. When first bought after a day or so I've noticed the front speakers don't work at all, after using the filter and balance I've come to...
  13. N

    Swissvax detail pics!!!!! A must see

    none of pics work
  14. N

    PCD + Offset for 8P Chassis + Lowering 40mm

    I dnt understand any of this, suppoe il need to wait an see when i get mine. I was thinking 30mm might be better on 18s
  15. N

    PCD + Offset for 8P Chassis + Lowering 40mm

    no but, my corsa was down 75/120 thats slammed :icon_thumright:
  16. N

    PCD + Offset for 8P Chassis + Lowering 40mm

    well tbh i wanna slam the A3 as low as possible to the floor on 18s without effecting anything. my corsa was quite low, i had it front/rear 75/120mm ok so 5x112, 8" width, and if i got ET50 i could drop 40mm with no problems? Will it effect the camber at all or is it a fixed camber on the A3
  17. N

    PCD + Offset for 8P Chassis + Lowering 40mm

    Hi, Not a A3 owner yet unfortunatly. Looking into buying a 8P A3, 2003 plate. Wanting to put 18" RS6 reps on it What PCD and offset are perfect fit for it, and would lowering 40mm be possible. Cheers. :rockwoot:
  18. N

    Estimate for repairs - Opinions needed also (8P experts needed)

    Im after 1 arond this age an engine size.... this is like the model in the middle isnt it? http://www.pistonheads.com/sales/373521.htm what can you expect from a 2.0 remapped? my mate is getting his pd130 mapped and is expecting about 170bhp
  19. N

    Estimate for repairs - Opinions needed also (8P experts needed)

    I like 8L but 8P is growing on me, i have about 8/9 to play with but most have so many miles. after 1.9 or 2.0 diesel. And if that was cheap repair would of been good. Oh well.
  20. N

    Estimate for repairs - Opinions needed also (8P experts needed)

    TBH guys, its ******. An you 8P owners have shown me this, i appriciate your input alot on this as i was thinking about going to have a look at it. See the only tool we dont have access to is a jig!
Top