Search results

  1. Moniek88

    A4 1.8t slow build

    Hey, What engine code do you onw mate? I always use impact gun to remove the crank bolts, there is no need to hold anything that way. There is some play in the diff abut not sure what play is allowed. No I`ve used my old joints as there where ok, just sandblasted them and painted. The clunk...
  2. Moniek88

    A4 1.8t slow build

    I understand that china can and do make good quality parts. I`ll most likely go with bager5 H or I beam rods are rather spend a bit extra and forget about it. Regarding pistons i was planning to stay with oem as not planning to get above 500hp, however if i can find a set in a good price I`ll...
  3. Moniek88

    A4 1.8t slow build

    Hey, The uprights and all the brakes are sorted now mate, thanks anyway. I just did not have the time to post any updates, there was a lot happening, stripped the engine, realised that I need another block. So got an AWT from a passat with 06A block. Need all intake side brackets if anyone got...
  4. Moniek88

    Anyone Breaking a B5 Quattro in Scotland?

    Try local scrap yards mate, what do you need?
  5. Moniek88

    Exhaust sound

    Catt back £700 316 ss Manifold plus down pipe will cost me same again.
  6. Moniek88

    Exhaust sound

    I think is the same stuff mate, I've had my made by R-fab locally. I'm not a good welder myself and this bloke got some talent there....
  7. Moniek88

    Found Be aware!! User Smith007 SCAM!

    also had the same message last night, User doesn't exist anylonger. Very good idea, it will cut most of them trying to get anything out of us. :redrs4:
  8. Moniek88

    Exhaust sound

    There it is mate
  9. Moniek88

    Exhaust sound

    I've deleted both silencers and replaced it with a custom one on 3inch system. Still got the catt in place tho for now. It is sounds quieter then I thought it will be as the catt still there.
  10. Moniek88

    VCDS Supplier

    I'm using obd11 pro for over a year now, what exactly is the issue mate?
  11. Moniek88

    TQS Exhaust DIY

    I'll do that for you. You'll be surprised how quiet it is mate with the catt on and one small silencer.
  12. Moniek88

    TQS Exhaust DIY

    Hi. Im afraid that this is a custom made so the guy making it won't be able to say exactly what bends he did make. I should be picking te car up today so I can run the lengths with tape measure but measuring the bends is always tricky. There is couple of things I'm not 100% happy with...
  13. Moniek88

    TQS Exhaust DIY

    I still haven't pick it up but got some photos already there for you.
  14. Moniek88

    1.8TQS Bang from the rear axle

    Hard to say but if you 100% sure the diff is dead then makes sense to replace it and ask the person to go through the diff suspension. Good luck
  15. Moniek88

    1.8TQS Bang from the rear axle

    Hey, sounds like diff carrier bushes or the support bush on front of the diff is gone, will it make the same bang on quick gear change?
  16. Moniek88

    TQS Exhaust DIY

    No worries, 3inch mate
  17. Moniek88

    TQS Exhaust DIY

    Hi, i`m not an expert but as far I know best is 314 ss grade, the wall should be around 1.5mm. I`ll be picking up my car from exhaust fabrication bloke, if you dont mind waiting till weekend I`ll send you a pictures of mine one when is done
  18. Moniek88

    Big brake conversion on 99` B5 (brembo 18z)

    I'm relatively new here so don't what use to be like but is seams little quiet. I've spaced out one of the adapters for now. Those hubs should have a part number on it but not those ones. Not to worry, I'll get there in the end. Thanks
  19. Moniek88

    Big brake conversion on 99` B5 (brembo 18z)

    Attaching some photos of the fitment Right side: Right side sits perfectly Left side: As you can see the l;eft side is off by few mm. Ignore the fact that the caliper is upside down. Any info regarding the front wheel hubs much appreciated. Cheers
  20. Moniek88

    Big brake conversion on 99` B5 (brembo 18z)

    Hi there, I have collected all the components to fit Brembo 18z calipers. When tried to fit them i run into a bit of issue. One of the calipers fits perfectly and sits right in between the rotor (left side) when the right caliper when mounted is resting against the rotor. We are looking for...
Top