Search results

  1. Y

    Ashtray delete/non-smoker tray retrofit - Pic heavy

    Just done this mod, and now have somewhere to put phone etc.... So it's done but what about the light , i am thinking..... so i takes the led and diffuser out of the old ashtray (even a red led ) And glue the led to the diffuser and strengthen it on the corner using heat shrink to support it...
  2. Y

    vcds cable supplier...

    Cheers for all the responses... Got one on it's way, let the coding begin!!:blink: or tie myself in a knot with it!! :uhm:
  3. Y

    vcds cable supplier...

    But them scans aren't costing ££££'s at a garage! :laugh:
  4. Y

    vcds cable supplier...

    cheers, for the replies folks... i shall enquire... :o.k:
  5. Y

    vcds cable supplier...

    Hi, people.... I think i remember reading somewhere on here that a forum member could supply a genuine rosstech VCDS cable.....(official distributer)? Was it NHN? hopefully someone will point me in the right direction..... Cheers, Phil.
  6. Y

    S3 erratic idle

    I paid just over £44 for the pair, you may get away without the gasket, mine was ok .... I presume S3 is the same as 2.0 tfsi....? valve is 06f 129 101 n gasket is 06f 103 483 e easy fix .... just take airbox off and it's looking at you... :happy:
  7. Y

    S3 erratic idle

    Hi, my 2.0 tfsi was doing this the other week, turned out that the pressure control valve was faulty.... Put a new one on and problem was sorted. i'm sure others will advise, if I'm wrong! :yes:
  8. Y

    2.0 tfsi erratic idle...

    Thanks folks, new pcv and gasket fitted today.... tickover is now smooth, and turbo seems smoother and pulls harder... Or is it me imagining it?.... thanks for the advice.... Phil :yahoo:
  9. Y

    2.0 tfsi erratic idle...

    Cheers for the replies folks, can't get oil cap off, definately being held by suction.... going to look for problems tomorrow, weather permitting....:think: thanks again, Phil.
  10. Y

    2.0 tfsi erratic idle...

    solved first problem, now enjoying the next one! not... looking for a bit more advice on a 2.0 tfsi... Been sat on motorway for a couple of hours, get off it and up to a set of lights and stop, and car is ticking over a bit rough, then revs up to 2000 rpm and drops back down to 800 ish...rpm...
  11. Y

    2.0 tfsi temp gauge low reading....

    stat in and running at 90 degrees, just in time for the coolish weather... Cheers for the advice folks....:happy: next problem, new thread.... boo hiss:detective2:
  12. Y

    2.0 tfsi temp gauge low reading....

    Thanks for the replies folks! indeed, and a very steep slope at times!!:lmfao:
  13. Y

    2.0 tfsi temp gauge low reading....

    Will stay with oem parts for sure! cheers for info....:icon_thumright:
  14. Y

    2.0 tfsi temp gauge low reading....

    Hmm... possibly possibly, could do with a bit more grunt (previous toy an RS6 ) :yum:
  15. Y

    2.0 tfsi temp gauge low reading....

    Cheers, Alex....... i reckon that confirms it! guess what ill be doing shortly...? :icon_thumright:
  16. Y

    2.0 tfsi temp gauge low reading....

    Cheers, Lewis and John.... I was thinking stat, but wondered about the electrically controlled stat as vcds was giving an engine outlet temp and radiator outlet temp... guess Lewis has cleared that one up for me! cheers.
  17. Y

    2.0 tfsi temp gauge low reading....

    I would think if stat is stuck open allowing full flow then it will be underheating, not requiring fan. As opposed to overheating and needing fan to cool if flow was restricted.... Unless i'm missing the obvious ..... I shall wait to be shot down in flames!! then get my coat.......... Thanks, Phil.
  18. Y

    2.0 tfsi temp gauge low reading....

    Hi, folks.... first post looking for a bit of advice, so go easy with me.... I have an A3 2.0 tfsi (bwa engine) and the temp gauge is saying coolant is running about 70 degrees when on the move, but does climb back up to 90 when stood.... once i'm up to speed again it will drop back to 70...
  19. Y

    another yorkshire lad joined up....

    Hi, all been reading stuff on here for a while, finally joined up ( can see all the pics now ) Have a 2.0 tfsi quattro, soon to be fiddled with.... Coming from owning an RS6, i'm Quite happy with the little one apart from the need to stiffen and lower it/ bigger wheels etc! there's a lot of...
Top