Search results

  1. dandav1985

    [How To] HBA Retrofit on 8V/MQB Platform

    Well, New Mirror bought and all is OK, so looks like it as a faulty Mirror. Thanks for all the reply's and help with this. Thursday,18,July,2019,15:01:23:27004 VCDS -- Windows Based VAG/VAS Emulator Running on Windows 7 x64 VCDS Version: 19.6.1.0 (x64) HEX-V2 CB: 0.4508.4 Data version...
  2. dandav1985

    8V VCDS Mods

    Hello Lads and Lasses, Anyone have you Auto Close in the Menu on the MMI? I've done the following and it all work perfectly but no display in the MMI display> Automatic Rain Closing 09 - Central Electronics Security Access - 16 Code = 31347 (15) Access Control 2 - Regenschliessen_ein aus =...
  3. dandav1985

    [How To] HBA Retrofit on 8V/MQB Platform

    Hello, Thanks for the reply, OK i'll see if I can get a new Mirror. Again Thanks for the Help. Cheers Dan
  4. dandav1985

    [How To] HBA Retrofit on 8V/MQB Platform

    Ok so this is the fault codes I have now, Any Ideas? Remembering I have Passenger and Driver side Dimming Mirrors which are not working, whih I understand are controlled by the Main Dimming Mirror. Coding? Faulty Mirror? Friday,12,July,2019,20:45:29:27004 VCDS -- Windows Based VAG/VAS Emulator...
  5. dandav1985

    [How To] HBA Retrofit on 8V/MQB Platform

    Hello Lads, Ok so have it working now but the Auto dimming Mirror is not working, would this need some different coding? I have Drivers and Passenger side dimming Mirrors to. Any Ideas? Thanks Dan
  6. dandav1985

    [How To] HBA Retrofit on 8V/MQB Platform

    Hello, As soon as I remove the mirror the fault goes and, just say High Beam assist fault, i've checked the Voltage Low Can is .04 v and High Can is 3.4 volts so i'm assuming its the Mirror. Thanks
  7. dandav1985

    [How To] HBA Retrofit on 8V/MQB Platform

    Cheers for the reply, OK so I have checked with my Multi Meter and i'm getting conductivity on the cabling. is there away of checking the can low and can high voltage? i'm assuming the mirror is faulty. Thanks Dan
  8. dandav1985

    [How To] HBA Retrofit on 8V/MQB Platform

    Hello, Fitted the Mirror with part no 81A857511C and followed everything on the tread twice. All i'm getting is no response from controller Any help Please....... See attached scan Friday,12,July,2019,13:31:46:27004 VCDS -- Windows Based VAG/VAS Emulator Running on Windows 7 x64 VCDS Version...
  9. dandav1985

    Audi A3 8V Reverse Camera (High) DIY Retrofit guide!!

    Anyone have a working link? Wont open for me says link can not be reached! Cheers Dan
  10. dandav1985

    Passenger Auto Dim Mirror.

    I think it's the H I'm after, as the one I have is making objects behind look like they are right up my **** lol. Cheers
  11. dandav1985

    Passenger Auto Dim Mirror.

    Any of you left hooker drivers fancy giving me the part number for their drivers side dimming mirror? or confirm this one for me. 8V0 857 535G the one i have ends in and F and seems to magnify everything lol.......doing my nappa in. Cheers Dan
  12. dandav1985

    Bonnet unlocked warning

    I think there is two switches either side, dont think there is one in the catch. Cheers
  13. dandav1985

    Bonnet unlocked warning

    That's funny because mine did this the other week, all I done was open the Bonnet and sprayed WD40 in the catch at the front, also some electrical cleaner in the switches either side been OK since. May just be an coincidence. Cheers Dan
  14. dandav1985

    Passenger Auto Dim Mirror.

    Best way to find out is tape up the sensor on the rear of the rear view mirror, turn the headlights on and shine a torch in to the sensor at the bottom of the rear view mirror and both mirrors should turn blue like the one in the picture, reply 39. Cheers Dan
  15. dandav1985

    Ghost immobiliser

    I have the Ghost fitted to my S3, fantastic piece of kit. Would recommend it all day long. Mine was fitted by Bass Mechanics in Newcastle. Monti and Dave are spot on.
  16. dandav1985

    Passenger Auto Dim Mirror.

    its in the Classifieds section for £20 delivered, if needed. Cheers Dan
  17. dandav1985

    Passenger Auto Dim Mirror.

    Yes the drivers one was fitted from the Factory with the power fold function. Cheers Dan
  18. dandav1985

    Passenger Auto Dim Mirror.

    Hello, No coding was needed as I already had the drivers one fitted. But i don't think you need to coding anyway if you have the rear view dimming mirror fitted. I have the wiring from the rear view mirror to the door jam plugs for sale if you need it. Cheers Dan
  19. dandav1985

    Passenger Auto Dim Mirror.

    Thats the Auto dimming Mirror dimming. when its not dimming its clear. Cheers
  20. dandav1985

    Passenger Auto Dim Mirror.

    Thanks for your help Rcord, finally got the wiring in the mirror fitted, luckily enough the wiring in the door and from the internal mirror was already fitted from the factory. So I only needed to fit the wiring on the passenger mirror. Once again thanks for the help Dan
Top