Search results

  1. T33_BKD

    Sold 2006 Audi A3 8P 2.0 TDi 140 Manual S-Line 3dr Brilliant Black

    After almost 6 years of ownership, the time has come to let go of my pride and joy. Will be listing it elsewhere but would ideally like someone on here to take over. It has been meticulously maintained throughout my ownership, with no expenses spared on tasteful modifications and upgrades. The...
  2. T33_BKD

    Instagram users names

    @T44MTD
  3. T33_BKD

    a3 2.0 tdi BKD cold start issue. flywheel advise please

    a new battery (with a high CCA) solved this exact issue on mine.
  4. T33_BKD

    Incorrect brake bleed or master cylinder failure?

    First garage told me to change the master cylinder for £100+ ! but they were just some backstreet cowboys - doubt anyone on here will go to them. i only went as i needed it done on the day, and thought it wasnt so hard to change - big mistake yeah, definately. complete monkeys! + thanks for...
  5. T33_BKD

    Incorrect brake bleed or master cylinder failure?

    update for anyone following this: Turns out the calipers were put on upside down (bleed nipple pointing down) and rear caliper wasn't air-tight :keule:. Master Cylinder was perfectly fine - proves its always worth getting a second opinion.
  6. T33_BKD

    Incorrect brake bleed or master cylinder failure?

    Right, so the MS was bled, but the problem is still there. They are refusing to accept liability for the "Broken" MS, claiming it was "already weak" and flushing the system has caused it to fail. Is this even possible? - especially since it was working perfect before. I will now be out of pocket...
  7. T33_BKD

    Manual for - Audi A3 2.0 TDI (2007)

    +1 let me know if you find any, I only found 8L Manuals after an extensive search.
  8. T33_BKD

    Incorrect brake bleed or master cylinder failure?

    Just spoke to them, told me it had been bled from there too, but they will 'double check' tomorrow.
  9. T33_BKD

    Incorrect brake bleed or master cylinder failure?

    From what i have been reading yes..... would this mean the garage may have buggered my MS when bleeding - and are now charging me for a new one....hmmm
  10. T33_BKD

    Incorrect brake bleed or master cylinder failure?

    I just had the 312mm upgrade and the rear disks changed. Now the brake pedal goes straight to the floor, but becomes stiff when pumped a few times. however it slowly goes back down towards the floor when held. Mechanic who changed it is saying its 'definately the master cylinder' - but i recall...
  11. T33_BKD

    Aluminium Tax Disc Holder - whats it good for now?

    a picture of hand gesture for the ticket wardens to see :nyah:
  12. T33_BKD

    Retrofit Home Coming Lights

    I couldn't get ch/lh working on my '06 a3 for almost a year. I had no idea what I was doing wrong as I followed the guides religiously. But it's all sorted now & fully working thanks to @Ash187 who managed to fix it yesterday in less than 2mins! He also sorted out a few other bits of coding and...
  13. T33_BKD

    Ideas on cost?

    I've been getting quotes of around £120-150 for the front bumper, and same prices for the rear
  14. T33_BKD

    Wiperblades

    +1 for Bosch. My valeo blades started streaking after just 3 weeks.
  15. T33_BKD

    What mpg are you getting in your 2.0tdi a3?

    mpg in the 40's range, depending on how its driven (urban+motorway mix). usually get 420-460 miles to a tank - 2.0 tdi bkd. high octane fuel seems to give far less miles...
  16. T33_BKD

    Slight shudder when idling

    The shuddering stops on mine once the clutch is pressed, my mechanic told me the engine mounts are loose (vibrates alot on startup). It's also a 56 plate on 115k
  17. T33_BKD

    Slight shudder when idling

    +1 I have the same on my '06 2.0 tdi S-line, once you realise you cant stop noticing!
  18. T33_BKD

    12v Ciggeratte Lighter/Socket not working - & its NOT the fuse!

    hmm alright thanks, guess ill try to source a new socket & then post results
  19. T33_BKD

    12v Ciggeratte Lighter/Socket not working - & its NOT the fuse!

    the light turns on, so im assuming its getting power from somewhere. I haven't got anything to get a voltages reading though.
Top