Hi mate, not sure yes not looked into it too hard at the minute but I believe the standard setup is TV and reverse camera module link together in the boot and the cables then run up to the mmi. Hope that helps, I know kufatec offer wiring looms and such so might be worth looking on there.
Yes I am trying to resolve the issue with the seller. It may not necessarily be every set that gives problems. I think it's a tricky business getting anything other than oem to work properly. I had problems with LED's with resistor harnesses. They said that they were error free but it would...
Well I done it properly and removed the front bumper to mount the ballasts to the crash bar. It took me about 3 hours as I spent some time deciding where to mount the ballasts and error cancellors. Saying that with the set I bought I am having some problems with them. When they turn on sometimes...
Right here goes on folding mirror retrofit!
Parts needed for this model were listed above in this thread.
Long Phillips screwdriver
Set of trim removal tools
Various Torx bits ranging from T20 up to T45
VCDS for recoding the door modules...
Yeah it's a necessity for me really the mirrors, yeah I know what you mean about the fogs, didn't really want to go hid route but I had led's in there and I didn't like the effect and believe it or not they didn't seem bright. I have just fitted the HID's will post pics of results later on...
My parts for my mirror retrofit arrived today.
For anyone interested the part numbers are:
4F0 959 565A
Little switch harness:
4F0 971 765
Door handle trim:
4F2 867 162
LH mirror with electric adjust, heated, memory function, puddle light, folding and plug for indicator: