why? correct angles twinjet spray pattern, same as oe injectors, better atomisation....
impossible to plug in an me7.5 onto m3.8 connectors. they're different
so you have removed squish deck.. and added deck cooling.
add some dimples and your head will look like my ibiza's one
wont be stem seals causing low comp
pistons/rings/bore and possible poor sealing valves
next is cylinder leak down test
depends on if you are basic on off single pressure switch kit or progressive type as to when its ideal to start spraying
you want it when you're...
enjoy your section 59
not using ie H for a few years now. tuscans when asked for them
using Ibeam rods generally, ZRP/Hurricane most often.
you think you have issues the 8L, lol, tfsi 8p engine's a minefield... crappy things
more a case of flow improvement than spool difference.
reduce backpressure, raise efficiency, gain flow etc etc
k04-022 is the non egt type fyi
you will need longer 60mm injectors being agu, so you can look for a long bosch 550cc type injector or normal...
bosch 440 greens? nasty spray patterns for 20v
if noise coming from front it cant be haldex can it.
describing a noise via words is pretty futile in diagnostic terms
indeed. but lets make a big issue out of it anyhow tho... :p
think about it, as I just cant be ***** arguing with the like of mentality such as yours... theorising worst case scenarios to make a point ........
and when you have been to b&q and picked up some paint brush cleaner, or shopping and the mrs has bought nail varnish remover, etc etc etc
in the same way the cars dont run "warning car contains petrol", or "warning boot contains pressurised tyre puncture repair cannister" etc etc etc
50/50 by volume not by mass
quite a few have fitted it
its not easy or great tho.. lhd brakes get in the way a lot
Separate names with a comma.