Search results for query: *

  1. Farmor00

    Audi a3 8l Rear speakers and sub dont work

    amp is located right side trunk, same as sub but opposite side essentially.
  2. Farmor00

    Ebay Wideband conversion kit

    Hi tuffty sorry for reviving an old thread but im currently in the process of swapping to 7.5 on my APY and my tuner told me that i need to swap the wiring loom/harness that comes out by the MAF (left side) so the smaller one. Can i take this loom from any 1.8t or does it have to be a k04 model...
  3. Farmor00

    S3 stalling problems

    Timing was off for me when i had this issue, vacuum hoses are easy first check though and its very common especially the hoses/lines under the intake manifold.
  4. Farmor00

    B5 Rs4 brakes on an S3

    i know S4 brakes fit with minor modification. unsure about RS4. ofc talking about b5 gen.
  5. Farmor00

    Tip for APY LHD

    https://gottuned.com/product/hard-pipe-inlet-kit-for-1-8t-20v-audi-s3-8l-a3-8l-a4-b5-audi-tt-8n-seat-leon-cupra-i/ Do you guys think this kit would fit non ESP LHD cars? It looks somewhat right.
  6. Farmor00

    A Swedish S3 to improve.

    Regarding the LCD I got mine from https://www.minitools.com/en/ and the job was carried out by https://www.psxcare.com/ in Stockholm.
  7. Farmor00

    AET-380 fitment for LHD APY S3

    Oh Thats Why the 80mm TIP fits for you then. On non esp brake master cylinder lines are different.
  8. Farmor00

    AET-380 fitment for LHD APY S3

    Does your S3 have ESP?
  9. Farmor00

    AET-380 fitment for LHD APY S3

    Additionally I assume the AET-380 comes with EGT while APY APX and AMK doesn't have an EGT sensor which would also be a compatibility issue or am I wrong here?
  10. Farmor00

    AET-380 fitment for LHD APY S3

    Okay thank you so much for the info. Do you have any pictures of V3 tip installed? I cut it like you would on BAM or AMK engines and it still didn't fit at all for me.
  11. Farmor00

    AET-380 fitment for LHD APY S3

    Hello everyone, I´m in the process of upgrading to a ported Chinafold, 3" downpipe and an AET-380 turbo but as I have a LHD APY S3 I cant even fit the V3 80mm tip let alone the V2 80mm tip. Does the AET-380 still come with the normal 54mm connection or is it just made for the V2 Tip?
  12. Farmor00

    For Sale AMSS - AndyMac Stealth Sub for Audi A3/S3 8L (1996-2003)

    You can use the standard wiring the problem is you cant know for sure which cable is plus and minus as they dont mark them properly from factory. Id say either go all out and change everything speakers,cables,headunit and amp. Or keep everything OEM But the sub. If you dont change headunit You...
  13. Farmor00

    lightweight seats

    Following
  14. Farmor00

    For Sale AMSS - AndyMac Stealth Sub for Audi A3/S3 8L (1996-2003)

    This sub has alot more bass to it! Its a swedish brand so its only well known in the nordic countries and has been around for ages. Its Also a 6.5” driver instead of the standard 6”. What sort of adapters are you after? High to low converter for amp?
  15. Farmor00

    Basserbox install guide for Quattro and S3 models.

    First relocate this ground, make sure its proper or you will get strange interior lighting behavior. Tuck away cables as shown and remove/cut/dremel the old ground bolt out of the way, same goes for the flanges on the rear arch as shown. Now unplug the alarm, unscrew it and screw it in the...
  16. Farmor00

    Fitting an AndyMac AMSS setup (sub, amp to Bose headunit).

    everything fits and works well. have not driven the car much since we still have snow here in sweden but first impressions are good.
  17. Farmor00

    For Sale AMSS - AndyMac Stealth Sub for Audi A3/S3 8L (1996-2003)

    AMSS for sale, 200£ + postage(45£ to UK) from Sweden with sub included its a MDS D4 Predator wired @2ohm rated at 500w rms(https://www.mds.se/ps06500d4.html) Pros of this box over others is ease of fitment on Quattro cars and that you can keep cd changer. There is also a full installation guide...
  18. Farmor00

    Fitting an AndyMac AMSS setup (sub, amp to Bose headunit).

    Yeah i removed cover and than i could actually get the door card on But it still sits on the black metal bar behind it. I might order to C3s than and sell the C2s. i could Also always sand down the MDF adapters If i still have fitment issues with the C3s.
  19. Farmor00

    Fitting an AndyMac AMSS setup (sub, amp to Bose headunit).

    So quick update the C2 kit doesnt fit with these adapters as they hit the metal bar behind which attaches to the windshield motor. Do you have any clearance issues with the C3 kit? The C3 kit have 7mm less depth officially and I'm not sure that's enough honestly as the MDF adapters which add...