Looks good @spiker
Did you do this without removing anything? Just applied to the foam left on the back of the leather and door card? Mine are coming away just at the top and look fine when I work them back into place.
I was hoping something like this would save me a lot of time/work.
Nothing has been coded. Can the Symphony 2 be coded?
My aux in is the external CD changer input converted to a 3.5mm socket.
The fluctuations were measured with nothing connected to the socket.
Today I tried to get to the bottom of an ongoing battery drain issue with my 2001 S3.
With the car "thinking' it was locked, I used one of these and tested each of the fuses at the end of the dashboard and on top of the battery.
The only fuse reporting any current was fuse 42...
I can't see a new generic map gaining you anything over what you already have.
Jabbasport are still going but look to be more focused on the 2.0T VAGs these days. Give them a call, see what they say. I'm hoping they may look after a returning customer/car.
I'm in a very similar position. I have a 'generic' (as they called it back in 2008) Jabbasport stage 1 remap. Over the years I have added various bolt-on mods. I have just had a Pipewerx down pipe and sports cat fitted - can't wait to collect it.
I have vag-com and I'm interested if there is...
My valve cover gasket needs replacing and the last time I did this I also replaced the CCT gasket and half moon just by raising the CCT.
This time, depending on pad wear, I am considering replacing the CCT itself 'whilst I'm there'. There are no errors in vag com, but I sometimes get a...
Those BAF downpipes caught my eye. You say it is custom, I was under the impression they are all made from a jig? You say there is no light, but has it been through a MOT yet?
If I lived closer I'd pay for BAF to fit. As I don't, I'm considering this as well as a Pipewerx. The...
Thank you for the feedback @ben4866, they do sound like a great upgrade.
I have found someone who supplies custom carriers and bolts specifically for the Renault Brembo calipers to fit MK1 TT's and S3's. They claim the standard lines work with them but a new banjo bolt is required. My own...
I haven't given up on this idea. Can I pick your brains some more? How has this setup been working for you?
Is there enough meat on the creation brackets to be re-threaded to take the larger Renault bolts? I'm not sure I like the idea of sleeving with ali tube.
So after some further reading I had potentially purchased some fuel hose of a dubious quality.
I have now purchased some Codan SAE J30 R9 High Pressure Rubber Fuel Hose.
It is supposedly "rated to 140ºC working temperature with intermittent 150ºC".
Do you think the charge pipe generates...
I've replaced these fuel lines before (twice!) with aftermarket hoses. The line closest to the charge pipe seems to crack and I assume it is heat related.
Do braided lines offer heat protection? Have you checked your lines aren't cracking under the braid?
Is a heat reflective sleave the answer?