Word of warning. I had 20 mm spacers on my rears. 20Inch alloys - they rubbed the paint away on the inside of both my arches away and the paint also peeled away from the outside edge of arch that sits above the wheel . costs repair £600
I now have 15 mm on rear and 20 mm on front.
If you want the proper tuning go to these guys. https://www.facebook.com/JDEngineering.nl/
The rest are Mickey Mouse.
Cost Circa £2000 if you let them do all the work.
Wagner Tuning Competition intercooler
RS6 intake with K&N panel filter
JD Stage 3 software.
LOL !! Apparently JD engineering couldn't reach 450 BHP !! What one is it guys ? Make your minds up. ! :footy:
Next you'll be banging on about how the JD STG 4 @ 485BHP is another made up number as well done on a fixed rolling road by the tuner to scam everyone. :hi:
Recently my stored ( on m phone) Iphone contacts come up on my MMI without the corresponding name showing and one the phone number digits. This is a new thing.
How can I fix it to show the under names of the number again ?
Audi will try and fob you off. I doubt the turbo needed replacing. Trouble is it will be an exchange unit and the old unit will be back at manufacturers being refurbed so you have no way of inspecting it now. Been here with Audi before a long time ago when they advise they change out a perfectly...
Its only of value if you intend pushing the BHP and Torque up and gives the engine greater breathing capacity. By itself, you will see a very mild difference but in my opinion it's not worth the £280 you would spend on the filter housing and filter itself
Parts for STG 3 BITDI
The part number of the K&N air filter is: E-1983 (audi S6 or A6 3.0tfsi) Takes 15 mins to fit
The airbox is from a RS6 (part number 4G0 133 836 AF). Takes 15 mins to fit
And the wagner Intercooler for an 3.0 tdi Biturbo 313HP. http://www.wagner-tuning.uk/200001103.html...