Search results for query: *

If you had bulbs lights to led dynamic you have to run 2 cables from Bcm to interior turn signals. Bcm C9 and C3 pins

Hello, I bought my car used and i have never seen my dab radio working . I have not any fault code with obdeleven but my dab is not working . - FM or AM work fine -I have checked the black fakra cable from unit to rear boot and looked fine ( it is not cut or broken ) . - I have not any dash...

You have to run 2 cables from the brown connector pins 15 to power and 16 to ground . I am 100% sure that pins 15&16 are missing .... Then the phone charger will work

Can you explain which pin is the positive and the ground? NIce info about installation

Hello mate, I have the same problem , did you find solution to that?

Use this oem strip from passat 5NA947220A

Use this oem strip from passat 5NA947220A

:

Do you find solution? Can anyone upload the kufatec diagram? I want to make retrofit and wiring diagram is important. Thanks in advance

My 2015 g-tron s-line :nogarors4:

Hello, i am trying to make the usb for mobile charging to work. I gave to 6 pin connector pin 1 - 12v and to pin 2 - ground but the usb2 ( for mobile charging) is dead. Please any help? Am i do something wrong? The pin 3 is nessesary for the usb ports to work and if yes, where i can find the...

No, didn't cut anything. Straight swap to factory springs. My car was too low . Now is too high . How can i have something between them?

Hi Daily use of my a3 make me angry with lowering springs. Felling was not good, like suspensions reach the end all the time, and after 4 years become normal again. I need need time to accept new look But suspension is soft and good again

Cloth fabric , oem cables and pins .

You can use switch from front doors too if you want to have lock/unlock instead of lock . Work both too with the same wiring Switch connector: Pin1--> goes to ground Pin2 --> goes to pin 10 door module Pin3--> goes to illumination Pin4--> goes to pin 11 door module Of course after installation...

Pin 10 and pin 11 from door module Other 2 cables is illumination and ground

Hi, try rotor from a4 b5 facelift . This is the rotor i use

Add some door pocket lights and check out results....

This is the factory code for brushed aluminium door trim

Some better door panel pictures with ambient lighting