Hi, i also use that LED 5NA94...... and an 2.5mm flex fiber tube. I don't know why but that bright is too low. hmm maybee need an old not useable door panel with B&O light and strip that down to see what is in there.
To bring ambient to run i sit a lot of moments in and search for the right...
Hi, i´am the Jayjay from MotorTalk :innocent:
Nice too see that my instruction also use here.
Today I finish my B&O Sound System retrofit.
Super nice and Clean sound.
But my light strip in the back is not really shiny bright. Hm so I wait for summer to with better temps for try to fix this...
At the Moment i retrofit B&O komplet. And Light in the Rear is a must have.
But my ligth in the Rear is Not so brigth.
I dont know why! Maybee the ligth stripe is Not Good or the 2.5 is too smal?
if you are lucky and get the sensors from the same car and body styl you maybe don't need calibration.
Yes it was changed from pFL to FL sensor.
You need the Left and Right Sensor/Modul the L and R LED in mirror. And the pin position and connector typ between pFL and FL is different. The best...
Hm ok. I installed the FL side view Sensor in my preFL bumper. I used an dremel to let fit the FL holder in the old styl hole. Connect the the preFL harness to the FL harness from the Sensors. Changed the LED in mirror, because FL is intern different to preFL. Hm Yea, codet the Sensor to the Car...
Google Earth ist possible. The Guy who help me with this VC retrofit have Google Earth retrofit MIB2 in his own car.
BUT! You need an from Audi original during assembly process activated AudiConnect and Google Earth activated MIB2 Unit. If You found an Unit that is activation you can Prepare it...