Search results

  1. CMcKenzie

    Pcv pipes oem

    That's the one Sent from my I3113 using Tapatalk
  2. CMcKenzie

    Pcv pipes oem

    Cloude 9 on facebook do a billet crank breather elbow, you'll never have to replace it again. Sent from my I3113 using Tapatalk
  3. CMcKenzie


    I mean don't quote me on that haha but I think s3, lcr, r32 and tt225 wishbones are the same, but other 1.8t ones are pressed, I've had a few so not 100% Sent from my I3113 using Tapatalk
  4. CMcKenzie


    No they're not, s3 are cast iron, a3 are pressed steel Sent from my I3113 using Tapatalk
  5. CMcKenzie

    Differences between A3 and S3 front sub frames?

    Yeah I was looking at that one also. Just can't be doing with hassle of returning it if it's wrong. Hopefully someone'll shed some light soon. Sent from my I3113 using Tapatalk
  6. CMcKenzie

    Differences between A3 and S3 front sub frames?

    I'm looking at overhauling the underside of my car, and was looking at buying a new subframe, some say not for 4wd models, others list A3's and S3's both being compatible. So does anyone know what the differences are? Will an A3 one fit an S3? My other option is to powdercoat mine, or buy a...
  7. CMcKenzie

    Haldex locked

    You'll be better asking in the 8V section as that's the same MQB chassis as the Golf R, this forum is for the 8L which is based on the mk4 Golf platform and uses the 1st generation Haldex system. Hope this helps Sent from my I3113 using Tapatalk
  8. CMcKenzie

    Billet injector cups for APY

    Hello, With everything thats going on, I'm struggling to source the oem plastic injector cups, so instead im looking to fit the billet ones from AKS. The trouble is, they don't list them for the APY, but have them for: BAM, AMK, AUM, ARY, AUQ, APX, AJQ, ARZ, BEX and AVJ. These are all small port...
  9. CMcKenzie

    clutch pedal on the floor

    When mine hit the floor, it was the bleed valve in between the two O rings in the picture, it sits on top of the gearbox and was leaking like mad. Worth a look. Sent from my F3111 using Tapatalk
  10. CMcKenzie

    What have you done today?

    Replaced my power steering pump and the 3 pipes with new ones, hoping to have it mot'd soon as driving a 1.4 diesel 207 is hell. I then had a well deserved beer [emoji482] Sent from my F3111 using Tapatalk
  11. CMcKenzie

    The last sunset....

    Friday evening / anytime Saturday would be ideal for me, I'm up for meeting at Harrogate.
  12. CMcKenzie

    Dealership meets

    Doncaster? Don't know where anyone else fancies though.
  13. CMcKenzie

    Coolant Temp sensor Issue ? -

    I used to have trouble starting the car sometimes when warm, if I'd nipped into a shop or petrol station, it'd always be a gamble as to whether the ig the car would start again or not. I was getting a code for the crank position sensor though. Replaced that and it never happened again. I...
  14. CMcKenzie

    Ash's Red 2002 BAM S3 Thread

    Mine's 'stage 1 mapped' with a generic done by a previous owner, I've fitted; Badger5 v3 tip, s2000 filter, FMIC and standard exhaust it makes 260bhp and I still get 28mpg.
  15. CMcKenzie

    Haldex filter change

    I seem to remember being quoted about £150 a while ago, I did it myself, reversed out up some ramps, jacked up the front, on some axle stands, cracked the filter off a little first, removed sump plug, let it drain then did oil and filter change whilst I was at it. Took maybe an hour start to finish.
  16. CMcKenzie

    steering rack

    Yup, also fitted an lcr rack to mine. Was from a company called auto Steer direct on eBay that recondition them with a 2 year warranty. You just ring them up and they'll come and collect your old one.
  17. CMcKenzie

    Ash's Red 2002 BAM S3 Thread

    I've got black 3SDM 0.01's fitted to mine. A set of spacers front and rear will get it sitting and looking more aggressive as the rear wheels sit quite far in as standard.
  18. CMcKenzie

    Prawn and BigAls A3 Track Car

    I work with Zak and having seen his work up close and the work he's done on another lad at work's 500bhp Astra, I can definitely say I'll be pestering him for stuff for mine. Looking good Nick [emoji106]
  19. CMcKenzie

    Post pics of your A3/S3

    Hi mate, I've not got any tints, just rear sun shades fitted for the little one, it's absolute red :)
  20. CMcKenzie

    Post pics of your A3/S3

    A few recent pictures of mine.