Search results

  1. ZK3

    Key Sync Issue

    Hi guys, I have a 2006 B7 A4, the problem I have is remote key related. From the start both keys worked fine for unlocking/locking the car via the door and starting the car. But only 1 of the 2 key fobs allowed me to lock and unlock remotely, anyways 1 month after owning the car, the key...
  2. ZK3

    Key Sync Issue

    Hi guys, I have a 2006 B7 A4, the problem I have is remote key related. From the start both keys worked fine for unlocking/locking the car via the door and starting the car. But only 1 of the 2 key fobs allowed me to lock and unlock remotely, anyways 1 month after owning the car, the key...
  3. ZK3

    Audi A4 - new steering wheel too tight to cowling

    Just to confirm purchased and fitted new cc switch and all working fine. More impressed with the steering wheel not rubbing, thanks for the advice lawrence you were right. Now to trawl the forums to figure out how to turn off the washer level sensor low error for DIS!
  4. ZK3

    A4 - 2006 BRD 170 after 3000rpm hesitate, coil plug flash and limp home mode p0234

    Yeah it goes in the fuel, works along side with the injector cleaner. It never fixed my problem as my turbo was too far gone but what I will say was after putting in the turbo cleaner and injector cleaner together once removed the turbo wasn't as bad as I thought it was behaving so clearly works.
  5. ZK3

    Audi A4 - new steering wheel too tight to cowling

    Thanks helps having someone been through it before! If thats not sat in the right position would that also cause code 000895 (malfunctioning cc switch ) bought second hand including cowling thought would try switch as eBay seller stated was tested before and working?
  6. ZK3

    Audi A4 - new steering wheel too tight to cowling

    Well somebody owed me a favour and was attempting to add/retrofit cruise control at the same time (still not sorted malfunctioning switch) but he said it all went in okay but you may have just answered my question, been too busy to get it done myself. Thanks
  7. ZK3

    Audi A4 - new steering wheel too tight to cowling

    Hi guys, Got an Audi A4 b7 2.0 BRD, previous steering wheel 3-spoke multi function changed to 4-spoke in eBay link below. Just wanted to pick peoples brains about what in my head seems a minor issue but cant seem to find a conclusive answer. Basically got a new steering wheel,(...
  8. ZK3

    A4 - 2006 BRD 170 after 3000rpm hesitate, coil plug flash and limp home mode p0234

    Just an update on this guys, as I hate when I read through and there is no update or closure on the issue. The car did actually improve after changing away from tesco fuel and I also put in the forte injector cleaner and turbo cleaner. I always had a bit of hesitation so never used 4th to its...
  9. ZK3

    A4 - 2006 BRD 170 after 3000rpm hesitate, coil plug flash and limp home mode p0234

    Surprisingly the car has had no issues over the weekend. Met a guy I was in school with who works for Forte now and says they sell a lot of the turbo cleaner with injector cleaner together, especially the local Audi garage! Make of that what you will, but will probably try it out anyways myself!
  10. ZK3

    A4 - 2006 BRD 170 after 3000rpm hesitate, coil plug flash and limp home mode p0234

    Thanks for the replies guys, already tried the forte when I did the service, didn't work straight away for me. The dpf makes a hollow whilstle (so it has been emptied and welded). I know the model is not in range for recall but don't have patience for speaking to Audi, not sure on Maf sensor but...
  11. ZK3

    A4 - 2006 BRD 170 after 3000rpm hesitate, coil plug flash and limp home mode p0234

    Hopefully posting in right place, always scanned through forums when had a3 now got A4 2.0 diesel, engine code BRD 170bhp, recently bought driving back it felt jerky/hesitating in 3/4 gear about 2500, up to 5/6 would let me get up to 3000-3750 but eventually coil light would flash and limp home...
Top