Search results for query: *

  1. E

    Running Issues at Cold

    Seals changed, car runs smooot when coldstarted now, but still a little bit jerky to start on cold engine. (wery much better than before) I had alot of wear inside my injector holes, so that might be the reason that it dident fix it 100%, the sharp wear-edges might have done damage to the new...
  2. E

    Running Issues at Cold

    Here is a okish writeup for the injectors : BRM PD150 injector install - TDIClub Forums Inspect for ovality as that is a problem too. (wearmarks in the hole on the opposite of the clamp...)
  3. E

    Running Issues at Cold

    And what car was that ??
  4. E

    Running Issues at Cold

    Well all injectors are pulled, and as i suspected the seals were worn out, hard and also the lowest seals had small damages. On the worst cylinder in vag com, the lower seal was broken. Will post up when reassembled.
  5. E

    Running Issues at Cold

    You can measure them, they get smaller on the opposite side of where the clamp holding them down are seated.
Top
Back