Well, the car starts and works perfectly. The fact that it started with the old sensor got me fooled that all my attempts at reparing failed because it still wouldn't start. Eventually I found out that all my attempts were doomed to fail anyways. Because when replacing the sensor at one time I...
Took another look at the engine yesterday and found a leak in the connecting pipe between the air filter and the intake manifold(1J0 129 684 E) on the connection with the oil cap. I thought i fixed it quite nice with some aluminium pipe and lots of tape but the car still wouldn't start.
Today I...
Placed a 4,7K resistor between to pins of the sensor and measured it up at the ECU loom and got only 10ohm difference with an el cheapo chinese multimeter.
When it still ran I kept getting a g28 sensor error which I've cleared after replacing the sensor. At the moment no fault code at all.
Unfortunately I can't replicate the g28 error which I did not save.
Hi,
I've got a '97 A3 8l 1.6 which recently got an issue where it would drop a couple of RPM's while running warm. It would mid-drive drop rpm and shock.
When warm it would also stall when running idle.
Reading it out with vcds it gave me a G28 sensor issue. So I bought a no-brand sensor off...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.