Jus fitted mine today (2020 B9.5) and my rear lighter socket has that light up part and the usb-c socket lights up also (not the USB-A though)
I guess it’s part of the comfort and sound pack
Yeah buy the socket easier than removing the carrier to hub bolts
Do both sets together as they bed in together
Correct they don’t have shims not needed I’d buy some wear sensors as mine broke
The sensors aren’t expensive for aftermarket
You can get an aftermarket dipstick (I use one)
Just fit them (you might need the correct type of socket to remove calipers from carrier)
I just bed them in by driving for about 50 miles using them more and more as miles clocked on and then some 60-20mph hard braking and allow time to let...
I killed the stock pads they over heated on one long spirited drive, utter garbage pads
Can’t fault them tbh been in 5000miles and still give good bite and don’t fade unless really really pushed
I’ll report back once the stock discs thrown in the bin and proper discs with floated centres...
I run the Brembo HP2 pads front and rear and have done since the day i bought mine, due to quite frankly crap stock pads.
squeal is there if you get them really hot and then cool done and then start rolling slow in traffic, but a quick 50-20mph consistent brake cleans them up and it goes
Just...
thanks for the prompt reply, i've got 1 of the 1st UK Intergrated Engineering FMIC to fit along with there intake parts, but if 550bhp & 800nm is obtainable with GPF that's ideal
PLEASE READ BEFORE YOU START SENDING ME PM’S OR REPLYING TO THIS THREAD
I’m not always on the forum so if you GENUINELY INTERESTED
Email me: matt@sierracosworth.co.uk with the subject heading of RS4 Engine
Collection is preferred
Engine is located in North West Cumbria (around 1 hour from...
wow just wow what a sweeping statement, i think you need to look at the many oem vehicle running 4 pot calipers
just 1 example is a mitsubishi EVO!
I'm going to guess that you aren't planning on tracking you car? what are your requirements looks or function? Road or Track?
The 4 pot Brembo...
you are not looking very hard then as there are many many options available for the S1
I'm going to guess the above revo/alcon setup will be £1500+
retain stock disc and fit the AP 4 pots from a Ibiza Cupra FR
fit the 323mm disc and Brembo 4 pots from a Leon Cupra FR
fit the MK4 Golf R32...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.