Search results for query: *

  1. A

    No water from the rear wiper jets

    Thats quite obvious! I'll try washing the lights with the car stationary to see if i have something similar. Thanks
  2. A

    No water from the rear wiper jets

    Thanks, was it noticeable by a puddle on the floor? How did you fix it?
  3. A

    No water from the rear wiper jets

    Thanks, I removed the jet and cleaned it out. Doing it whilst fitted to the car had no effect so removing it is defiantly required. I'm going through screen wash quickly so with have a leak somewhere or am enjoying being able to wash the rear screen again too much :-D
  4. A

    No water from the rear wiper jets

    I use halfords concentrated fluid, watered down to 4:1.
  5. A

    No water from the rear wiper jets

    Hi, I'm not getting any water from my S3 rear wiper jets, fronts & headlights work fine. I've checked the jets and they are clear. On my old 8L's I had the pipe that feed the rear pop apart at joints in the engine bay and the boot behind the subwoofer along with the well know issues with the...
  6. A

    8V VCDS Mods

    Thanks, mines a 63 plate and I have the digital speedo displayed so thats a no then. Quite annoying as the smaller display shows the date, oil temp etc via the scroll wheel but not the time, rubbish..................
  7. A

    8V VCDS Mods

    Is it possible to get the time displayed on the screen between the dials? I often drive with the MMI stowed away which hides the time.
  8. A

    Rear seat rattle under braking.....

    Thanks Ross, What did you do to adjust the latch, loosen some securing bolts and move it slightly?
  9. A

    Rear seat rattle under braking.....

    Guess its just mine then, i'll take a look at the seat/catch and see if there's any adjustment possible.
  10. A

    Facelift retrofits to pre-facelift

    That pretty much rules that out then...... :tearsofjoy:
  11. A

    Facelift retrofits to pre-facelift

    Any idea yet if the Facelift Black Edition grill will fit a PFL?
  12. A

    Rear seat rattle under braking.....

    The passenger side rear seat backrest rattles under braking & over rough spots in the road which is getting quite annoying. (S3 with Leather/Alcantara seats). Is this a known issue and is there any adjustment in the backrest/latch to tighten it up? Thanks Steve
  13. A

    Anyone else with a manual selecting reverse instead of first!?

    Glad its not just me then :grinning: Anyone tried adjusting the shifter cables?
  14. A

    Anyone else with a manual selecting reverse instead of first!?

    10 years of driving a 8P S3 and never did it but in just 10 days of having my 8V S3 its happened at least 5 times & I know 100% that I didn't push down on the lever as that takes a reasonable effort.........
  15. A

    Anyone else with a manual selecting reverse instead of first!?

    I've done this a few times with mine & know I didn't push down on the shifter. Is there any adjustment in the cables?
  16. A

    Boot opens when i start the car, any ideas?

    As above, give it a good pull and watch out that you don't lose the 2 surrounds for the 'bumpers' on the lower edge.
  17. A

    A4 Avant S-Line Tow Bar Coding

    didn't take a screen dump, sorry. Can try to get one but its a friend from works car so may take a while. I was ticking the 'trailer installed' check box in 07-long coding helper-Byte 5-Bit 4 the code was being changed from 0A194012232503080000 to...
  18. A

    Towbar Fusebox wiring

    Yes, no problems with removing pins if required. Can you help with my coding question here? http://www.audi-sport.net/vb/audi-s4-a4-a4-cab-b8-chassis/113479-a4-avant-s-line-tow-bar-coding.html Thanks
  19. A

    A4 Avant S-Line Tow Bar Coding

    Thanks, thats where its placed at the moment. I believe there is a proper piece of moulded plastic available from Audi as well.
  20. A

    Towbar Fusebox wiring

    Turns out the car was already 'towing equipped'. Hidden inside a piece of grey foam was the red plug that goes into the Westfalia box already wired into the car power and CAN bus. All that was needed was to connect the earth strap from their loom and plug in the black plug on their loom.
Top
Back