Search results for query: *

  1. George Kost

    Central locking will lock, but not unlock

    Good idea to check your spare key. On my key there is a red led that lights up when any button is pressed. Check this also. So with your first key, you can still lock remotely? Maybe not a cabling problem then. Although I believe that when unlocking with the key on the door (not remotely) all...
  2. George Kost

    Central locking will lock, but not unlock

    Check the door wire harness at the driver's door. You will probably find broken wires or with damaged insulation. If the issue is there, you will probably face issues with the window switches etc.
  3. George Kost

    Boot lid light flashes when locking and unlocking

    Sorry for the late relay. They sell tool for removing the pins. Not sure if you can find them locally. I have bought in the past from Aliexpress. Like this photo.
  4. George Kost

    Boot lid light flashes when locking and unlocking

    I only say it so you don't mess with soldering if not comfortable and if you go that way remember to insulate the solder points to avoid moisture getting there!
  5. George Kost

    Boot lid light flashes when locking and unlocking

    Why don't you crimp new terminals instead of soldering? I suppose the new connector you bought has already crimped short cables. Those can be removed. I would buy something like the attached photo. (random connector found online)
  6. George Kost

    Which fuse for radio in 2009 a3

    Mine is Fuse #9
  7. George Kost

    Got my A3 8P A 170 DSG

    If it is made of ABS, you can smooth it out with acetone. Check youtube videos for process and results. But be careful of fumes and possibility to damage the part. If it is printed with PLA it might deform from heat over time! It should be printed of ABS or at least PETG.
  8. George Kost

    Wiring diagrams needed

    Check ElsaWin for wiring diagrams. You might even find an online version if you cannot find the software.
  9. George Kost

    Inner door rubber seal weatherstrip

    This is the part for the 3door. 8P3831721K28P Again you will probably find a replacement part for much less. Or use generic 3M seal like boost-addict said.
  10. George Kost

    Fuse

    Mine is an 1.4 TFSI and has a 5A fuse at holder 18. Same description "Diagnose Starter"
  11. George Kost

    Inner door rubber seal weatherstrip

    You mean this? Part 21? If I see correctly, for the Sportback for example the part number is 8P4831721C28P for black color. So if you search online you will find plenty of replacement parts.
  12. George Kost

    Post your eBay, Classified and For Sale links and wanted in here. Do not create a thread.

    Very nice job! Does it allow to connect at the same time 2 phones? And accept calls from both (of course not simultaneously)? This is a very important thing missing from my cheaper bt module I got from eBay a log time ago.
  13. George Kost

    Door modules/looms

    They changed the pins of the rear doors at some point if I remember correctly. Any way you will have to insert the pins of the looms to your existing door module connector. Check this PDF. It has all 4 doors and what pin is used for each lamp. Those are for 2012 4door. For example, first page...
  14. George Kost

    TPMS Button retrofit - Can't find the right pin on the ABS Module!

    Nice! Mine in different location for reference.
  15. George Kost

    Spurious Warning Lights

    I removed the battery last week and then had an ABS fault. After turning the steering wheel both ways, it cleared.
  16. George Kost

    TPMS Button retrofit - Can't find the right pin on the ABS Module!

    Yeah I installed mine last week! Do you press the button once or keep it pressed for 3-4 seconds to reset? I want to remove some air from one tire to trigger the TPMS and then try to reset it to check.
  17. George Kost

    Audi A3 8p Sportback 2009 rear light control module location?

    Yes for sure you need to code the new. Not that difficult. Just copy each value of the old and transfer to the new. And pair the keys to the new BCM. Have you also checked the fuses?
  18. George Kost

    Audi A3 8p Sportback 2009 rear light control module location?

    Not sure what your issue might be. But if I am not mistaken, the rear lights are powered directly from the BCM. There is no module just for lights. Your's is a facelift correct? Then the BCM is located under the dash inside the car. From the wiring diagrams, it seems that each bulb is...
  19. George Kost

    TPMS Button retrofit - Can't find the right pin on the ABS Module!

    Just found out that there are 2 buttons for TPMS. 8P0927121B and 8P0927121C 8P0927121B is on the left 3 buttons, the first button from the left (where I have the Start/Stop button) 8P0927121C is on the right 3 buttons, the first after the hazard button. Next to the PDC and PLA buttons! So your...
  20. George Kost

    TPMS Button retrofit - Can't find the right pin on the ABS Module!

    Yeah the issue with the cluster is if i remember correctly, that you cannot change the value on adaptions block 37. I have the same issue. Only accepts 0 or 1. But it should accept 1001 for it to work. Mine is Sept 2009, with white DIS also. Like this one with same problem...
Top
Back