Search results for query: *

  • Users: OzA3
  • Order by date
  1. O

    Transfer box and rear diff oil change

    It's about 0.9l for the front box. Had 2 litres and was just enough for front and rear. Hope this helps.
  2. O

    Transfer box and rear diff oil change

    Hi all, Decided to clean the Haldex gauze filter and change the rear diff and front transfer box oil while I was at it. There doesn't seem to be many guides on the rear diff and transfer box so attached what I did below. Just to clarify the difference between the Haldex drain/fill and rear...
  3. O

    Hold Assist Retrofit.

    Back again with good news! All working now. Was user error with VCDS. The coding changes as above to byte 08 and 19 must be done together or the 'out of range' error shows up. Special thanks to dandav1985, DJAlix and other contributors in this forum, legends!
  4. O

    Hold Assist Retrofit.

    Tried again today but could only change byte 23, bit 0 as before. Says out of range for byte 08 and 19. Never experienced a coding issue like this before. Maybe my particular long coding has some sort of conflict with another bit, the hardware and software number/version all seem OK. But on a...
  5. O

    Hold Assist Retrofit.

    Excellent guide! Had a go at this today with mixed success. Was able to activate hold assist but couldn't get the green dash light to come on (definitely fitted, works on an output test). Something odd is going on with the coding. Wasn't able to change byte 08 or 19, says error 31 out of...
  6. O

    Facelift Disables bluetooth? WTF

    Noticed this minor issue as well with bluetooth disconnecting. Removed the OEM AMI to lighting cable and replaced it with a AMI to USB/USB to lighting combo. Charges the phone fine and all music/calls uses BT without auto disconnect.
  7. O

    8V VCDS Mods

    Ok, got this working! Passenger door done, drivers side to go. Pin 5 is ground. Tapped into the brown wire at the power window switch. Pin 16 is puddle/warning lights Pin 8 is for ambient light It's a nice neat job if you're able to get some factory parts. Instructions below: Cut out the...
  8. O

    8V VCDS Mods

    Working on this lighting mod like you rcnacura, think i've got it cracked with your help and DJAlix. I'm able to adjust the ambient door lighting via MMI! Haven't done the wiring yet, but the software side looks good =) Using OBDeleven and the ambient light live view changes with the MMI...
  9. O

    How to guide; audi a3/s3 door pocket lights guide

    Hi, Attempting this mod as well. Anyone have instructions on how to enable the interior lighting menu in the MMI? Mine only shows exterior as an option. Enabled bits 0-3 byte 1 in both driver and passenger door already.
  10. O

    8V VCDS Mods

    Cheers to DJAlix and aymensallam! Tried the change above for safelock and worked perfectly. Changed byte 8 bit 6 (from 43 to 03) and now enabled.
  11. O

    8V VCDS Mods

    Attempting to enable safelock but bit 9 shouldn't exist? Should only have 8 bits per byte, can anyone check this? Cheers.
  12. O

    Hi from Sydney

    Cheers. For some reason I can't change my sig or PM anyone, would you be able to help out? =)
  13. O

    Hi from Sydney

    Just joined after picking up my daytona grey A3 8V S-line. OBDeleven on order for some tweaks!
  14. O

    Oz delivered A3 8V quattro S-Line joing the forum!

    Oz delivered A3 8V quattro S-Line joing the forum!
    • OzA3
    • Profile post
Top
Back