So im having little problem with my passat, 1.9tdi engine 85kw and year 2000, variant.
When car is running the voltages are like 14.5 so the alternator is good.
Also battery is good for sure. (car is build for subwoofers and there is 3 extra big batteries but they cut off when I shutdown the...
Sold the car with this problem, Guy who bought it wanted only the transmission because its one thing that I changed and was fully working. But I did not have place to remove transmission anymore so I gave the whole car :) Before this I had so much problems with this car and my wallet was empty...
So I have fault code 01376 engine speed sensor for injection pump.
I removed the engine speed sensor and disconnected it. Still 1 fault code. If I remove any other sensor I get new code. So I think this ESS is broken somehow? I did mesurments and it says 832ohm. Somewhere I read that it should...
theflywheel is fine. I still think that the pump is somehow broken. it wont pump disel into the engine. But can I somehow check it so I can make sure about it?
the fault code says that pump wont deliver info to ecu
It did not help me.
It cannot be timing because before oil cange. Engine was running no problem. I even checked timing then. After oil change the engine was running but badly. The timing was still OK.
Then I removed rocker cover and after I put everything back together it wont start. Like the...
It was starter motor. I changed it and the noise is gone.
Now the problem is why it wont start. It gives me always fault code : 01376 ( SPEED SIGNAL FOR INJECTION PUMP DEFECTIVE)
I have changed the engine speed sensor, and checked the wires.
yes I know, I deleted all codes. thers no codes anymore. The metal hitting thing is Starting motor, its broken down what I can tell and when starting it jumps over the "theeths"
But why the engine is not starting I dont know that. I changed engine speed sensor. no effect.
I checked the timing belt. It seems fine to me. The belt is fine and not broken or anything. If I want to remove injectors I have to remive the rocker cover? And then remove bolts that hold injector? And then I just pull the injector out? I have injector testing machine or whatever is called :D