Search results for query: *

  1. MA3TDIQ

    Problem at 2200-2400rpm!

    yes, problem resolved after installation of new donut prop shaft ring
  2. MA3TDIQ

    Audi A3 cluster bench set up

    Found this cable on Ali express -...
  3. MA3TDIQ

    Audi A3 cluster bench set up

    Hi all, Trying to test a cluster on the bench and am having some difficulty in powering it on. I have used the following pin out diagram to connect a 12v (1.5A) power supply. 12V - 1,2,18 GND - 3,4,19 Can wake-up - 5 Can H&L - 29,30 The cluster does appear to receive power but doesnt power...
  4. MA3TDIQ

    09 White Cluster/DIS fitted to 04 8P

    Going to try this mod soon. I bought a white clsuter on the bay, will do eePROM edit to enable needle sweep and boost guage. Mine is pre facelift a3 8p 57 plate so should have correct fuel pump wire etc. My only concern was the immobiliser code - any idea how I can retrieve this code? Also, I...
  5. MA3TDIQ

    RNSE asking for pin repeatedly

    Great thanks! I’ll have a look!
  6. MA3TDIQ

    RNSE asking for pin repeatedly

    Which wires are the bus wires? Can you show on a diagram?
  7. MA3TDIQ

    RNSE asking for pin repeatedly

    Hi, I installed my RNSE over 10 years ago, recently it has started to ask for my PIN code on startup. Did have an issue with the battery but that’s sorted now. Any ideas how to stop it doing this? Could be a button battery in the RNSE that needs replacing? I have wired my RNSE so that it is...
  8. MA3TDIQ

    Front camera install

    Ok that's great. The camera I bought was quite cheap from Aliexpress. It doesn't really fit properly under my rings as I have installed the honeycomb grill. Have others done this install that could recommend a good camera that fits in the honeycomb grill?
  9. MA3TDIQ

    Front camera install

    After checking with my multimeter, it appears that all the fuses from the engine bay fuse box are permanently on. It looks like I will have to get a wire through the firewall to the cabin to get a switched live. Anyone done this before?
  10. MA3TDIQ

    Dynamic side indicators

    Ok thanks for reply. But if canbus doesn’t like them why would they work perfectly when engine is off? Has anyone tried fitting them with resistors to make them work?
  11. MA3TDIQ

    Dynamic side indicators

    Installed these dynamic side indicators on my Audi a3 8p. Works great with engine off: https://youtu.be/n4620kJdG7E?feature=shared As soon as engine is switched on I get this error: https://youtu.be/16Gek_L2Oas?feature=shared Had a quick search on google and looks like I’m not the only...
  12. MA3TDIQ

    Front camera install

    Yes, I do have a multimeter. Just wondered if anyone done this retrofit before to point me in the right direction..
  13. MA3TDIQ

    Front camera install

    Thanks for that, Is there a live feed for the headlights? I want a wire to become live with headlights on..
  14. MA3TDIQ

    Front camera install

    Im looking to install a front camera just under my front Audi rings in the honeycomb grill. I need a switched live feed from somewhere under the bonnet. Anyone know the best way to go about this? Is there a way to take this from the fusebox perhaps? Im also looking for a live switch that comes...
  15. MA3TDIQ

    Rear Diffuser (with pictures)

    Looking for some advice regarding the rear diffuser of my 2007 pre facelift Audi A3 8p. I am keen to upgrade the diffuser, I have managed to source a honeycomb type, however I believe it was from a facelift model. I had a quick look but im not 100% this is a straight swap. Anyone done this...
  16. MA3TDIQ

    Haldex Oil filter - rusted fill screw (picture)

    Great thanks, ill give this a shot tomorrow and give an update on this. My heart just sank when I turned the key and noting happened. Part of me is thinking, is it worth continuing with this job if im having now issues with the haldex? Is it harmful to continue to use the same haldex oil/filter?
  17. MA3TDIQ

    Haldex Oil filter - rusted fill screw (picture)

    So I was attempting to do a Haldex service on my 2007 Audi A3 - It has a Gen 2 haldex. I had bought all the equipment needed including the oil and filter. I got stopped in my tracks when I realised the fill plug was completed rusted on and can't get it off. Thankfully I didn't take the oil out...
  18. MA3TDIQ

    Rear brakes/caliper advice-pics included

    My a3 8p rear discs were needing replaced as my pad had worn through. Decided to buy a new set of discs/pads and calipers - RIDEX through autodoc Got a garage to install it, got the car back, my OS rear disc/pad is sticking despite everything new. Looks like the pad is also engaging the disc...
  19. MA3TDIQ

    Central locking issue

    Ah ok thx, Was it straight forward to swap it out?
  20. MA3TDIQ

    Central locking issue

    Having done some reading I found that commonly the cables are broken in the hinge. I pulled the rubber bung away and the cables were actually intact! does that mean my door locking module is needing replaced? Any ideas? Thanks
Top
Back