Search results for query: *

  1. rbdazza

    S3 exhaust mods …

    Possibly. Assume they’d have to be removed to check that? Which would mean dropping back box. Didn’t try restarting as it was in eco when I started up.
  2. rbdazza

    S3 exhaust mods …

    Started in eco but switched through them all
  3. rbdazza

    S3 exhaust mods …

    Ok im a bit stumped. Looks like they are enabled but on idle are open?
  4. rbdazza

    S3 exhaust mods …

    Both sides still plugged in. I’ll check the vcds link
  5. rbdazza

    S3 exhaust mods …

    Thanks. I’ll check to see if they’re unplugged first, is the cable above the back boxes? If they are I’ll grab my vcds cable and check the link you sent. They aren’t meant to be black and in person they both look equally sooty
  6. rbdazza

    S3 exhaust mods …

    Think it’s safe to assume they’re open then. How can I reactivate them?
  7. rbdazza

    S3 exhaust mods …

    Also, does the S3 have exhaust valves? And is it possible they’ve been set to permanently open? It is loud even on start/tickover. I’ve got vcds, well I did have I need to test it as been sat in the garage for years
  8. rbdazza

    S3 exhaust mods …

    I recently bought a pfl s3 that is stage 2, decat and res delete. I thought I liked all the noises , but might want to quieten it down a tad at some point. I have the original cat, but understand it needs a remap to add this back in. What would be my best bang for buck here if I do want to...
  9. rbdazza

    Couple of queries on fuel sender

    Can anyone help?
  10. rbdazza

    Couple of queries on fuel sender

    Actually the fault is Fuel Rail/System Pressure , P0087 00 (101) - too low. Pressure actual : 117700 hPa
  11. rbdazza

    Couple of queries on fuel sender

    My car is struggling to start and when it does it won't rev and the glow plug light is flashing According to vcds I have low fuel pressure. I've removed the fuel pipe under the bonnet, in fact both in case I had the return and not the feed and am getting no fuel! So; 1. When should the...
  12. rbdazza

    VCDS USERS MAP

    lead has arrived, installed latest VCDS and all working.
  13. rbdazza

    EGR valve

    +1, get shot of it. your wallet and your DPF will thank you for it. P.S. when your DPF gives up thanking you for it, get rid of that too, better still get them both done at the same time
  14. rbdazza

    VCDS USERS MAP

    i've got VCDS and the lead coming this week on lend from another forum I am on. i have never used it before but when i get it setup, if you know what you need to do, feel free to pop round and plug in. P.S. i live in heanor too!
  15. rbdazza

    Headlights aiming low

    I would recommend some grease or WD40 on the joins of the linkage as a preventative measure pal.
  16. rbdazza

    Headlights aiming low

    I'm a tight ****** me lol. Needed it sorting as I've got a fair few miles to do this week. The alternative fix I considered was to tape the arm up in the level position which might have lasted a bit longer and wouldn't have caused any problems as I don't tow. I'll get a replacement soon....
  17. rbdazza

    Headlights aiming low

    My temporary fix seems to have sorted it, for now
  18. rbdazza

    Headlights aiming low

    lol, not my neatest work i must say! i'm going to look out for a second hand one. its obvious why its failed; where the bottom of the arm attaches it is like a semi circle plastic clip that clips on to a ball bearing shaped clip on the lower arm. there was corrosion and it was solid so as the...
  19. rbdazza

    Headlights aiming low

    That's what I thought. Don't worry I've fixed it anyway
  20. rbdazza

    Headlights aiming low

    £130 for the whole thing, i want some of what they are smoking!
Top
Back