Search results

  1. DJAlix

    Would an Audi A3 8V door module work on a Audi Q2 (exact same parts numbers)?

    Yes, am able to bench most modules.
  2. DJAlix

    Mirror glass???

    Heated mirror glass is around £46 cost price. If your mirrors are heated and auto dimming then it’s around £360
  3. DJAlix

    Would an Audi A3 8V door module work on a Audi Q2 (exact same parts numbers)?

    Not that I have noticed. Seems to be random. Last time I saw this was with a q2, time before was with an A3 where the parts were sourced from a uk breakers yard.
  4. DJAlix

    Would an Audi A3 8V door module work on a Audi Q2 (exact same parts numbers)?

    It happens, well can happen, when you replace A3/S3 door modules with used A3/S3 door modules also. No logic to it.
  5. DJAlix

    Would an Audi A3 8V door module work on a Audi Q2 (exact same parts numbers)?

    Will it work? Yes, they are basically the same cars but chances are once installed your window switches will be reversed ie up = down etc and you will need to parameterise. Have seen this a lot.
  6. DJAlix

    Installation guide for activating RS Engine Data and Shift Lights on Virtual Cockpit

    Your vehicle only has one CAN gateway, but it has multiple CAN networks. Your 360 camera would be connected to the Extended CAN bus but the module you are looking to install needs to go to the Drive Drain network I believe. Might be possible to pick this up else where in the vehicle, suggest...
  7. DJAlix

    Retrofit folding mirrors

    I offer this for approx £700.00 (would need a VIN to quote), fitted and using new parts with 2 years warranty.
  8. DJAlix

    Virtual cockpit in pre face s3 8v

    Yup, posted this in my sponsors section and will be adding further information also.
  9. DJAlix

    Virtual cockpit in pre face s3 8v

    Depends on your retrofitter and budget. One thing to note... it’s no longer possible to retrofit a used virtual cockpit in the Audi MQB platform.
  10. DJAlix

    Virtual cockpit in pre face s3 8v

    Incorrect. There are two versions of the FL dashboard, one for the analogue cluster and one for the virtual cockpit. They are different dimensions. If you are fitting a virtual cockpit in to a non-virtual cockpit dash then you need to cut or change it.
  11. DJAlix

    Replacing the factory radio with a touch screen

    That would be something you would need to test.
  12. DJAlix

    Help Please Safe mode

    Would need to see the vehicle in order to see what’s going on, possible gateway issues but needs a proper diagnostic.
  13. DJAlix

    Replacing the factory radio with a touch screen

    ok so what you have here is what's called an MIB Entry System which is made up of the glovebox control until and then the dash mounted screen and controls. You would need to upgrade all the parts involved in order to have a working MIB Standard, HS or High system, example: MIB2 HS Glovebox...
  14. DJAlix

    Replacing the factory radio with a touch screen

    ok, I had the number. I would suggest that you edit your post to remove the number.
  15. DJAlix

    Replacing the factory radio with a touch screen

    Send me your vin number please, via private message, I can see which system you have then. I work in Greece also, but will not be visiting until we are allowed to travel again. Athens, Lamia and Kavala.
  16. DJAlix

    Replacing the factory radio with a touch screen

    We don’t see the MIB Basic radio in the uk so I am not 100% sure how the system is built. I am assuming that what’s in your dash is the complete unit however do you have a CD player in your glovebox?
  17. DJAlix

    Replacing the factory radio with a touch screen

    As I have said there are no factory touch screens available for the 8V, your only option is 3rd party / after market. The screen you have attached in your photo is not a touch screen.
  18. DJAlix

    Replacing the factory radio with a touch screen

    No factory touch screen options available for the 8V so you would need to look after market. If you were looking to retrofit an OEM non-touch screen solution then you would need to change all your existing components as your current radio system is not compatible with any MIB1 or 2 Standard...
  19. DJAlix

    Facelift AUDI A3 8V - Armrest Container / Phone Box Removal

    Once you remove the console and the glovebox you will see :)
  20. DJAlix

    Facelift AUDI A3 8V - Armrest Container / Phone Box Removal

    Complete centre console out job. Remove controls, remove rear air vent, remove armrest, remove all bolts, slide console to the rear while lifting. Once out, turn upside down and you will see the 4 screws that secure the “tub”.
Top