Search results

  1. MELenium

    Retrofitting folding door mirrors

    Hi RobinA3 Things have progressed a little bit since that message, I don't have the correct door modules which are 5Q4 959 393 F and 5Q4 959 392 F. But with some further investigation I have managed to find a couple of door modules from a crashed Japanese 2019 Audi A1 which is RHD, they are 5Q4...
  2. MELenium

    Parts request disappeared

    Hi Any update concerning the parts request?
  3. MELenium

    Parts request disappeared

    Hi Since the upgrade yesterday the parts request has disappeared.
  4. MELenium

    New Audi A1 - Passenger Mirror Dip

    Hi DTL If you look on the inside cover of your manual or in the boot the codes you have will be there so you can see what type of mirrors you will have fitted. If your mirror don't have the memory function it will not dip. If they are just standard mirrors ie. Adjustable and heated the code...
  5. MELenium

    Retrofitting folding door mirrors

    Hi My 2019 A1 came without folding door mirrors and I was looking to retrofit some. I asked Tom at Crewe parts and he has given me a price but he says that as far as Audi say they don't fit my car. The parts are Drivers side: 82C857410B, Passenger side: 82C857409B and the switch is 2G0959565E...
  6. MELenium

    Audi UTR dash cam problem

    Hi becks2012 I got it sorted thanks
  7. MELenium

    erWin

    Hi Thanks for everyone that has helped me, I bit the bullet and went for another 1 hour and this time I managed everything that I needed. Thanks again.
  8. MELenium

    Coding High Beam Assist

    Hi Rockape You should have the new coding in my pm that I've just sent you.
  9. MELenium

    Coding High Beam Assist

    Hi 1Rockape I will send you a pm with the new code
  10. MELenium

    Coding High Beam Assist

    Hi 1Rockape I've have reverted back to the beginning and recoded it slightly different and it now works correctly with the mmi showing Activation Time
  11. MELenium

    Coding High Beam Assist

    Hi 1Rockape I've just noticed in the mmi under the external lights, it shows where you can switch the high beam assist on or off but the activation time where you could change from high, medium and low has disappeared, it was there before I coded the high beam assist. Should it still be there?
  12. MELenium

    Coding High Beam Assist

    Hi 1Rockape I've sent you a pm
  13. MELenium

    Coding High Beam Assist

    Hi Rockape Not looked yet I will have a look tomorrow
  14. MELenium

    Coding High Beam Assist

    Hi 1Rockape I'm hoping this is the A5 code: Controller A5, Coding 07: Byte 21 change to 20
  15. MELenium

    Coding High Beam Assist

    Hi 1Rockape Thanks I will have a look tomorrow
  16. MELenium

    Coding High Beam Assist

    Hi 1Rockape Were these in adaption 10?
  17. MELenium

    Coding High Beam Assist

    Hi 1Rockape I started to try this after looking at those sites you had giving me 09 Central Electronics Security Code. 31347 Adaption 10 Then in the pull down menu I only found these 5 under Assistant light function: Assistant light function-Assistenzfahricht bei regen. (assistant driving in...
  18. MELenium

    erWin

    Hi B5NUT I install a PDF printer and then click on print and then it will ask you save as a PDF in a folder on my computer, is this what you mean?(not to actually print them)
  19. MELenium

    Coding High Beam Assist

    Hi 1Rockape I haven't tried anything yet and I have the led lights. I'll have a look at the britskoda forum. I am based in County Durham
  20. MELenium

    Coding High Beam Assist

    Hi 1Rockape On page 15 of the site you sent me, does the coding look similar to what you did with your A3?
Top