Has anyone here installed one of the kufatec cruise control kits? No instructions came with it so I'm a little confused with what wire relates to...
Started to notice I was getting the signs of warped discs (pumping brake pedal & juddering steering wheel) I didn't think I'd been driving the car...
Ok so I wanted to know what my IDC is at 6.7k & whether mfa can do this. Did a search & came back with nothing. Asked on the fb groups hoping for...
Can anyone confirm the size of the map sensor. Engine code is Bam, I was under the impression its 12mm?
Anyone from the forum going to aitp?
Finally about to get round to actually fitting the dw65 pump I bought last year! Is there any guides or anyone got any tips on this as I've seen...
I've decided to ditch the airtec front mount and install a welly cooler as I've seen a few posts here & on fb groups where the airtec is fine for...
Currently have a pipeworx down pipe into a milltek non res system but had thought about having a 3" downpipe back custom system made for my car...
Looking at opening up a k04 hotside to match a chinafold I'm doing. I'll be opening it up to 47mm the same as my bbt418 turbo collector is, the...
Ok it turns out I have a leaking inlet cam seal. The seal in question is the black ptfe type, being replaced with a rubber one. I haven't a seal...
Looking to fit a afr gauge but wanted to know if you can use the existing point just after the turbo on the down pipe. I know there's two, pre...
Just a thought & wanted to see if anyone has any input on this, is it worth porting/blending the turbine outlet in the pics? There's a pronounced...
Trying to find out whether my drive shaft is the earlier type or newer version. Bought a n/s front drive shaft from a s3 breaker on fb the cars a...
Changed my engine mounts today & managed to break this part that goes to the charcoal canister........ It's pulled out & won't go back in, just...
Installing a aem wmi kit that I bought second hand. 3 of the pins that are in the block that connects to the controller just had the wires pulled...
[ATTACH] I've looked online to try & find the pipe that links a either side of a brembo caliper but I can't seem to turn anything up other than...
What's a good brake pad for brembos? someone has said if it's a road car then standard pads but there's a few standard pads out there from varies...
I've a bbt418 hybrid + Chinafold manifold to fit but have heard of the gasket between the turbo hotside & manifold blowing, I'm trying to avoid...
I need to pull the engine from a 2002 s3 I've looked through the stickies & done a quick search but didn't find anything. Has anyone a link or...
I was settled on the B12 kit after reading the stickies but have seen Demon tweeks has a sale on coilovers and can pick up the B14's at a very...
Separate names with a comma.
