Hi 2.0 tfsi , starts fine all the while except if it’s sat in hot weather , it turns over for a while if it’s been sat and weathers warm . Starts...
Bags are definitely out of the equation,coilys every set I’ve rode on sub £900 have been well crashy ,I’m past all that at my age, I could...
Do they sit level on standard suspension just using b5 cups?
Standard 9 spoke et 43 ,I was thinking b5 cups as front looks like the boots full of illegal immigrants the way these sit, I can only find springs...
I know this has probably been covered before ,so I’ll apologise. I’m thinking of lowering my Quattro sline using springs ,probably using H&R as...
Looking for recommendations for remap Warwickshire area for tfsi Quattro,R-Tec are on my doorstep but only have 2wd dyno
Think the cams are just going to come out with chain attached then deal with it or at least deal with the chain or I can see either bolt shearing...
A4 B7 2.0t fsi,engine been rattling lately which got me thinking chain tensioner might be on way out,took to a local garage who are very good Indy...
I'm hoping its dropped down from the tensioner, I don't think its crank or associated things apart from the rattle engine sounds fine , no bottom...
metal mate I think,garage only sent a pic but looks like ally to me,ive been trying to upload a video of engine rattle ,but cant seem to do it
this was in sump,its ally so not making the noise
A4 2005 tfsi,had a noise that sounded like chain tensioner so took car into local specialist,car has 70k and fmdsh,before garage checked chain he...
2.0 tfsi bwa engine,I know these are pretty noisy at idle but I’ve been concerned mine is very noisy,garage one Said all is fine ,garage 2 said...
The door gap is smaller at bottom than top by a couple of mm near wing,also chrome window trim sits 2mm lower were it meets back door,I think it...
Hi got an issue with my drivers door rubbing on A pillar ,cars straight ,never been in accident,I know I can adjust lock catch but not sure if...
What area are they mate ,do they have web page
Looking for recommendations for tfsi Quattro remapping around Warwickshire Leicestershire area ,R etc can't do it as fixed 4WD
not sure mate ,Damian has sent some new ones out and is sending mine back to Germany so they can see
Big thumbs up to Damian at DPM for sorting issue I had with some H&R spacers
I'm starting to think the same, monkey metal ! Better of it was machined instead of cast
Separate names with a comma.
