So i didn't pass technical inspection because "the driver side sill is rusted" so i pulled the plastic fender to investigate and.... [ATTACH]...
Hi, Fired up the car first time after the rebuild and my horn wasn't working so after connecting the vagcom i got big errors on the airbags...
hello, My DMF is toast and the repair shop quoted 220 euros to repair and 70 euros to resurface it with the basket + a new clutch disk so i'm...
hello, i'm looking for the oe number of this item because it needs to be replaced and the only place where i found it was on aliexpress. Many...
hello, i'm looking for bearing options and found that ACL 0ffers them in regular size and +0.025mm oil clearance hole size (still standard size...
hello, I'm doing a rebuild on my APY 1.8t and need a new block because mine has a damaged cylinder wall. I was at the junkyards today and found a...
hello, i'm doing a rebuild on my 1.8t APY and would like to know the maximum bore on which stock pistons can be used. I read in the workshop...
Hi guys, I managed to repair a faulty haldex pump (gen 1) but this can also work on gen 2 and 3 i believe. After i noticed the read end being...
Hi, just go the 17748 error: 17748 - Camshaft Position Sensor (G40) / Engine Speed Sensor (G28) P1340 - 35-00 - Incor. Correlation...
Hello, Just got the bulb light flashing on the s3 and the left low doesn't work anymore, so thought i'd change all bulbs for new ones cause i...
Hi, i'm about to install an oil radiator (19 row) on my car and would like to know which thermostat would be best suited on the sandwich plate,...
Hello everyone, i'd like you to introduce to my suspension restoration project. The goal here is to restore the (not in so good condition)...
Hello, I own an audi S8 APY and after getting it remaped multiple problems popped up: -car runs very rough on cold start (wiggles between 850 to...
Hello, what engine oil should be best used for an s3 (APY). I'm currently using motul 5w-40 (not sure with one exacly). Should the oil have a vw...
Hi, I own an s3 apy and my radiator fans and ABS stopped working at the same moment. After changing my steering rack and control arms I started...
Hello, I have just removed the front lower control arms from my audi s3 8l and plan on replacing the bushings. However there are no marks for the...
Hello, i own an audi s3 apy and would like to increase port size for better airflow. What would be the best option , to convert my small port to...
Hello, I installed a forge bov today ton my s3 APY but i have 2 problems: -how many "clicks" (how tight does the spring has to be?) do i have to...
Hello, I plan on dissembling my 1.8t APY engine but will need a bentley manual with the proper torque values to reassemble it. Anyone got it in...
Hello. I am currently fitting a gt2871r in my APY engine. For the moment my engine isn't rebuilt and uses stock rods. I want to drive it for the...
Separate names with a comma.
